[PATCH 2/2] ARM: dts: keystone: add interrupt property to PCI controller bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Now that Keystone PCIe controller supports error interrupt handling
add interrupt property to PCI controller DT bindings to enable
error interrupt handling.

Signed-off-by: Murali Karicheri <m-karicheri2@xxxxxx>
---
 - applies to master v4.7-rcx at kernel.org git repo
 arch/arm/boot/dts/keystone-k2e.dtsi | 2 ++
 arch/arm/boot/dts/keystone.dtsi     | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
index 5374c9a..9a51b8c 100644
--- a/arch/arm/boot/dts/keystone-k2e.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e.dtsi
@@ -104,6 +104,8 @@
 			num-lanes = <2>;
 			bus-range = <0x00 0xff>;
 
+			/* error interrupt */
+			interrupts = <GIC_SPI 385 IRQ_TYPE_EDGE_RISING>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc1 0>, /* INT A */
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index f627a1c..e23f46d 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -302,6 +302,8 @@
 			num-lanes = <2>;
 			bus-range = <0x00 0xff>;
 
+			/* error interrupt */
+			interrupts = <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc0 0>, /* INT A */
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux