Obtain the values of the mode pins from the R-Car RST driver, which
relies on the presence in DT of a device node for the RST module.
Fall back to calling rcar_gen2_read_mode_pins() in the R-Car Gen2
platform code for backward-compatibility with old DTs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
v3:
- Use the R-Car RST driver instead of syscon/regmap and the
"renesas,modemr" property in DT,
v2:
- drivers/clk/shmobile/ was renamed to drivers/clk/renesas/.
---
drivers/clk/renesas/clk-rcar-gen2.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/clk/renesas/clk-rcar-gen2.c b/drivers/clk/renesas/clk-rcar-gen2.c
index 00e6aba4b9c09596..436fc7a7714e4bd7 100644
--- a/drivers/clk/renesas/clk-rcar-gen2.c
+++ b/drivers/clk/renesas/clk-rcar-gen2.c
@@ -19,6 +19,7 @@
#include <linux/of_address.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
+#include <linux/soc/renesas/rcar-rst.h>
struct rcar_gen2_cpg {
struct clk_onecell_data data;
@@ -372,6 +373,15 @@ static void __init rcar_gen2_cpg_clocks_init(struct device_node *np)
unsigned int i;
int num_clks;
+ if (rcar_rst_read_mode_pins(&cpg_mode)) {
+ /* Backward-compatibility with old DT */
+ extern u32 rcar_gen2_read_mode_pins(void);
+
+ pr_warn("%s: failed to obtain mode pins from RST\n",
+ np->full_name);
+ cpg_mode = rcar_gen2_read_mode_pins();
+ }
+
num_clks = of_property_count_strings(np, "clock-output-names");
if (num_clks < 0) {
pr_err("%s: failed to count clocks\n", __func__);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
