Add syscon reset controller binding. This will hook to the reset framework and use syscon/regmap to set reset bits. This allows reset control of individual SoC subsytems and devices with memory-mapped reset registers in a common register memory space. Signed-off-by: Andrew F. Davis <afd@xxxxxx> [s-anna@xxxxxx: revise the binding format] Signed-off-by: Suman Anna <s-anna@xxxxxx> --- .../devicetree/bindings/reset/syscon-reset.txt | 105 +++++++++++++++++++++ include/dt-bindings/reset/syscon.h | 23 +++++ 2 files changed, 128 insertions(+) create mode 100644 Documentation/devicetree/bindings/reset/syscon-reset.txt create mode 100644 include/dt-bindings/reset/syscon.h diff --git a/Documentation/devicetree/bindings/reset/syscon-reset.txt b/Documentation/devicetree/bindings/reset/syscon-reset.txt new file mode 100644 index 0000000..cec6e32 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/syscon-reset.txt @@ -0,0 +1,105 @@ +SysCon Reset Controller +======================= + +Almost all SoCs have hardware modules that require reset control in addition +to clock and power control for their functionality. The reset control is +typically provided by means of memory-mapped I/O registers. These registers are +sometimes a part of a larger register space region implementing various +functionalities. This register range is best represented as a syscon node to +allow multiple entities to access their relevant registers in the common +register space. + +A SysCon Reset Controller node defines a device that uses a syscon node +and provides reset management functionality for various hardware modules +present on the SoC. + +SysCon Reset Controller Node +============================ +Each of the reset provider/controller nodes should be a child of a syscon +node and have the following properties. + +Required properties: +-------------------- + - compatible : Should be "syscon-reset" + - #reset-cells : Should be 1. Please see the reset consumer node below + for usage details + +SysCon Reset Child Node +============================ +Each reset provider/controller node should have a child node for each reset +it would like to expose to consumers. + +Required properties: +-------------------- + - reset-control : Contains the reset control register information + Should contain 3 cells defined as: + Cell #1 : register offset of the reset + control/status register from the syscon + register base + Cell #2 : bit shift value for the reset in the + respective reset control/status register + Cell #3 : polarity of the reset bit. Should be 1 or + RESET_ASSERT_SET for resets that are + asserted when the bit is set, 0 or + RESET_ASSERT_CLEAR for resets that are + asserted when the bit is cleared + +Optional properties: +-------------------- + - reset-status : Contains the reset status register information. The + contents of this property are the equivalent to + reset-control as defined above. If this property is + not present and the toggle flag is not set, the + reset register is assumed to be the same as the + control register + - toggle : Mark this reset as a toggle only reset, this is used + when no status register is available. + +SysCon Reset Consumer Nodes +=========================== +Each of the reset consumer nodes should have the following properties, +in addition to their own properties. + +Required properties: +-------------------- + - resets : A phandle to the reset controller node and a phandle to a + reset specifier node as defined above. + +Please also refer to Documentation/devicetree/bindings/reset/reset.txt for +common reset controller usage by consumers. + +Example: +-------- +The following example demonstrates a syscon node, the reset controller node +using the syscon node, and a consumer (a DSP device) on the TI Keystone 2 +Hawking SoC. + +/ { + soc { + psc: power-sleep-controller@02350000 { + compatible = "syscon", "simple-mfd"; + reg = <0x02350000 0x1000>; + + pscrst: psc-reset { + compatible = "syscon-reset"; + #reset-cells = <1>; + + pscrst-dsp: dsp { + reset-control = <0xa3c 8 RESET_ASSERT_CLEAR>; + reset-status = <0x83c 8 RESET_ASSERT_CLEAR>; + }; + + pscrst-example: example { + reset-control = <0xa40 5 RESET_ASSERT_SET>; + toggle; + }; + }; + }; + + dsp0: dsp0 { + ... + resets = <&pscrst &pscrst-dsp>; + ... + }; + }; +}; diff --git a/include/dt-bindings/reset/syscon.h b/include/dt-bindings/reset/syscon.h new file mode 100644 index 0000000..9927779 --- /dev/null +++ b/include/dt-bindings/reset/syscon.h @@ -0,0 +1,23 @@ +/* + * Syscon Reset definitions + * + * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __DT_BINDINGS_RESET_SYSCON_H__ +#define __DT_BINDINGS_RESET_SYSCON_H__ + +#define RESET_ASSERT_CLEAR 0x0 +#define RESET_ASSERT_SET 0x1 + +#endif -- 2.8.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html