On 09/05/16 09:16, Sean Nyekjær wrote:
>
>
> On 2016-03-28 17:13, Jonathan Cameron wrote:
>> On 12/03/16 09:28, Jonathan Cameron wrote:
>>> On 11/03/16 14:12, Sean Nyekjaer wrote:
>>>> Signed-off-by: Sean Nyekjaer <sean.nyekjaer@xxxxxxxxx>
>>> Looks much better to me.
>>>
>>> Looking for Acks from Lars and a device tree binding maintainer
>>> on this one though.
>>> (added CCs)
>> Lars?
> No response...
> Is there anything wrong with this?
Given we are early in cycle there is no real rush for this...
Lars, let me know if you are going to a while getting to this / any other
patches I want responses on from you.
Thanks,
Jonathan
>>> As an aside Device Tree bindings maintainers, do you prefer a personal cc
>>> or just getting them directly from the devicetree list?
>>>
>>> Jonthan
>>>> ---
>>>> Changes since v4:
>>>> - Appended -hz to dc-dc-freq
>>>> - Added adi,dc-dc-max-microvolt
>>>> - Added reg property
>>>>
>>>> Changes since v3:
>>>> - replaced '_' with '-'
>>>> - Now used actual values instead of register values.
>>>>
>>>> Changes since v2:
>>>> - Removed defines, alot easier to read
>>>>
>>>> .../devicetree/bindings/iio/dac/ad5755.txt | 124 +++++++++++++++++++++
>>>> 1 file changed, 124 insertions(+)
>>>> create mode 100644 Documentation/devicetree/bindings/iio/dac/ad5755.txt
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/iio/dac/ad5755.txt b/Documentation/devicetree/bindings/iio/dac/ad5755.txt
>>>> new file mode 100644
>>>> index 0000000..f0bbd7e
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/iio/dac/ad5755.txt
>>>> @@ -0,0 +1,124 @@
>>>> +* Analog Device AD5755 IIO Multi-Channel DAC Linux Driver
>>>> +
>>>> +Required properties:
>>>> + - compatible: Has to contain one of the following:
>>>> + adi,ad5755
>>>> + adi,ad5755-1
>>>> + adi,ad5757
>>>> + adi,ad5735
>>>> + adi,ad5737
>>>> +
>>>> + - reg: spi chip select number for the device
>>>> + - spi-cpha or spi-cpol: is the only modes that is supported
>>>> +
>>>> +Recommended properties:
>>>> + - spi-max-frequency: Definition as per
>>>> + Documentation/devicetree/bindings/spi/spi-bus.txt
>>>> +
>>>> +Optional properties:
>>>> +See include/dt-bindings/iio/ad5755.h
>>>> + - adi,ext-dc-dc-compenstation-resistor: boolean set if the hardware have an
>>>> + external resistor and thereby bypasses
>>>> + the internal compensation resistor.
>>>> + - adi,dc-dc-phase:
>>>> + Valid values for DC DC Phase control is:
>>>> + 0: All dc-to-dc converters clock on the same edge.
>>>> + 1: Channel A and Channel B clock on the same edge,
>>>> + Channel C and Channel D clock on opposite edges.
>>>> + 2: Channel A and Channel C clock on the same edge,
>>>> + Channel B and Channel D clock on opposite edges.
>>>> + 3: Channel A, Channel B, Channel C, and Channel D
>>>> + clock 90 degrees out of phase from each other.
>>>> + - adi,dc-dc-freq-hz:
>>>> + Valid values for DC DC frequency is [Hz]:
>>>> + 250000
>>>> + 410000
>>>> + 650000
>>>> + - adi,dc-dc-max-microvolt:
>>>> + Valid values for the maximum allowed Vboost voltage supplied by
>>>> + the dc-to-dc converter is:
>>>> + 23000000
>>>> + 24500000
>>>> + 27000000
>>>> + 29500000
>>>> +
>>>> +Optional for every channel:
>>>> + - adi,mode:
>>>> + Valid values for DAC modes is:
>>>> + 0: 0 V to 5 V voltage range.
>>>> + 1: 0 V to 10 V voltage range.
>>>> + 2: Plus minus 5 V voltage range.
>>>> + 3: Plus minus 10 V voltage range.
>>>> + 4: 4 mA to 20 mA current range.
>>>> + 5: 0 mA to 20 mA current range.
>>>> + 6: 0 mA to 24 mA current range.
>>>> + - adi,ext-current-sense-resistor: boolean set if the hardware a external
>>>> + current sense resistor.
>>>> + - adi,enable-voltage-overrange: boolean enable voltage overrange
>>>> + - adi,slew: Array of slewrate settings should contain 3 fields:
>>>> + 1: Should be either 0 or 1 in order to enable or disable slewrate.
>>>> + 2: Slew rate settings:
>>>> + Valid values for the slew rate update frequency:
>>>> + 64000
>>>> + 32000
>>>> + 16000
>>>> + 8000
>>>> + 4000
>>>> + 2000
>>>> + 1000
>>>> + 500
>>>> + 250
>>>> + 125
>>>> + 64
>>>> + 32
>>>> + 16
>>>> + 8
>>>> + 4
>>>> + 0
>>>> + 3: Slew step size:
>>>> + Valid values for the step size LSBs:
>>>> + 1
>>>> + 2
>>>> + 4
>>>> + 16
>>>> + 32
>>>> + 64
>>>> + 128
>>>> + 256
>>>> +
>>>> +Example:
>>>> +dac@0 {
>>>> + #address-cells = <1>;
>>>> + #size-cells = <0>;
>>>> + compatible = "adi,ad5755";
>>>> + reg = <0>;
>>>> + spi-max-frequency = <1000000>;
>>>> + spi-cpha;
>>>> + adi,dc-dc-phase = <0>;
>>>> + adi,dc-dc-freq-hz = <410000>;
>>>> + adi,dc-dc-max-microvolt = <23000000>;
>>>> + channel@0 {
>>>> + reg = <0>;
>>>> + adi,mode = <4>;
>>>> + adi,ext-current-sense-resistor;
>>>> + adi,slew = <0 64000 1>;
>>>> + };
>>>> + channel@1 {
>>>> + reg = <1>;
>>>> + adi,mode = <4>;
>>>> + adi,ext-current-sense-resistor;
>>>> + adi,slew = <0 64000 1>;
>>>> + };
>>>> + channel@2 {
>>>> + reg = <2>;
>>>> + adi,mode = <4>;
>>>> + adi,ext-current-sense-resistor;
>>>> + adi,slew = <0 64000 1>;
>>>> + };
>>>> + channel@3 {
>>>> + reg = <3>;
>>>> + adi,mode = <4>;
>>>> + adi,ext-current-sense-resistor;
>>>> + adi,slew = <0 64000 1>;
>>>> + };
>>>> +};
>>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
>>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
