Re: [PATCH v5 2/2] iio: ad5755: Add DT binding documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 11/03/16 14:12, Sean Nyekjaer wrote:
> Signed-off-by: Sean Nyekjaer <sean.nyekjaer@xxxxxxxxx>
Looks much better to me.

Looking for Acks from Lars and a device tree binding maintainer
on this one though.
(added CCs)

As an aside Device Tree bindings maintainers, do you prefer a personal cc
or just getting them directly from the devicetree list?

Jonthan
> ---
> Changes since v4:
> - Appended -hz to dc-dc-freq
> - Added adi,dc-dc-max-microvolt
> - Added reg property
> 
> Changes since v3:
> - replaced '_' with '-'
> - Now used actual values instead of register values.
> 
> Changes since v2:
>  - Removed defines, alot easier to read
> 
>  .../devicetree/bindings/iio/dac/ad5755.txt         | 124 +++++++++++++++++++++
>  1 file changed, 124 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/dac/ad5755.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/dac/ad5755.txt b/Documentation/devicetree/bindings/iio/dac/ad5755.txt
> new file mode 100644
> index 0000000..f0bbd7e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/dac/ad5755.txt
> @@ -0,0 +1,124 @@
> +* Analog Device AD5755 IIO Multi-Channel DAC Linux Driver
> +
> +Required properties:
> + - compatible: Has to contain one of the following:
> +	adi,ad5755
> +	adi,ad5755-1
> +	adi,ad5757
> +	adi,ad5735
> +	adi,ad5737
> +
> + - reg: spi chip select number for the device
> + - spi-cpha or spi-cpol: is the only modes that is supported
> +
> +Recommended properties:
> + - spi-max-frequency: Definition as per
> +		Documentation/devicetree/bindings/spi/spi-bus.txt
> +
> +Optional properties:
> +See include/dt-bindings/iio/ad5755.h
> + - adi,ext-dc-dc-compenstation-resistor: boolean set if the hardware have an
> +					 external resistor and thereby bypasses
> +					 the internal compensation resistor.
> + - adi,dc-dc-phase:
> +	Valid values for DC DC Phase control is:
> +	0: All dc-to-dc converters clock on the same edge.
> +	1: Channel A and Channel B clock on the same edge,
> +	   Channel C and Channel D clock on opposite edges.
> +	2: Channel A and Channel C clock on the same edge,
> +	   Channel B and Channel D clock on opposite edges.
> +	3: Channel A, Channel B, Channel C, and Channel D
> +	   clock 90 degrees out of phase from each other.
> + - adi,dc-dc-freq-hz:
> +	Valid values for DC DC frequency is [Hz]:
> +	250000
> +	410000
> +	650000
> + - adi,dc-dc-max-microvolt:
> +	Valid values for the maximum allowed Vboost voltage supplied by
> +	the dc-to-dc converter is:
> +	23000000
> +	24500000
> +	27000000
> +	29500000
> +
> +Optional for every channel:
> + - adi,mode:
> +	Valid values for DAC modes is:
> +	0: 0 V to 5 V voltage range.
> +	1: 0 V to 10 V voltage range.
> +	2: Plus minus 5 V voltage range.
> +	3: Plus minus 10 V voltage range.
> +	4: 4 mA to 20 mA current range.
> +	5: 0 mA to 20 mA current range.
> +	6: 0 mA to 24 mA current range.
> + - adi,ext-current-sense-resistor: boolean set if the hardware a external
> +				   current sense resistor.
> + - adi,enable-voltage-overrange: boolean enable voltage overrange
> + - adi,slew: Array of slewrate settings should contain 3 fields:
> +	1: Should be either 0 or 1 in order to enable or disable slewrate.
> +	2: Slew rate settings:
> +		Valid values for the slew rate update frequency:
> +		64000
> +		32000
> +		16000
> +		8000
> +		4000
> +		2000
> +		1000
> +		500
> +		250
> +		125
> +		64
> +		32
> +		16
> +		8
> +		4
> +		0
> +	3: Slew step size:
> +		Valid values for the step size LSBs:
> +		1
> +		2
> +		4
> +		16
> +		32
> +		64
> +		128
> +		256
> +
> +Example:
> +dac@0 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	compatible = "adi,ad5755";
> +	reg = <0>;
> +	spi-max-frequency = <1000000>;
> +	spi-cpha;
> +	adi,dc-dc-phase = <0>;
> +	adi,dc-dc-freq-hz = <410000>;
> +	adi,dc-dc-max-microvolt = <23000000>;
> +	channel@0 {
> +		reg = <0>;
> +		adi,mode = <4>;
> +		adi,ext-current-sense-resistor;
> +		adi,slew = <0 64000 1>;
> +	};
> +	channel@1 {
> +		reg = <1>;
> +		adi,mode = <4>;
> +		adi,ext-current-sense-resistor;
> +		adi,slew = <0 64000 1>;
> +	};
> +	channel@2 {
> +		reg = <2>;
> +		adi,mode = <4>;
> +		adi,ext-current-sense-resistor;
> +		adi,slew = <0 64000 1>;
> +	};
> +	channel@3 {
> +		reg = <3>;
> +		adi,mode = <4>;
> +		adi,ext-current-sense-resistor;
> +		adi,slew = <0 64000 1>;
> +	};
> +};
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux