From: Carlo Caione <carlo@xxxxxxxxxxxx>
Add the binding documentation for the Amlogic secure monitor driver.
Signed-off-by: Carlo Caione <carlo@xxxxxxxxxxxx>
---
.../bindings/firmware/meson/meson_sm.txt | 51 ++++++++++++++++++++++
1 file changed, 51 insertions(+)
create mode 100644 Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
diff --git a/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt b/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
new file mode 100644
index 0000000..2b71716
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
@@ -0,0 +1,51 @@
+* Amlogic Secure Monitor
+
+In the Amlogic SoCs the Secure Monitor code is used to provide access to the
+NVMEM, enable JTAG, set USB boot, etc...
+
+Required properties for the secure monitor node:
+- compatible: Should be "amlogic,meson-sm"
+- amlogic,sm-cmd-input-base: SMC32 function identifier to read the physical
+ address of the input buffer
+- amlogic,sm-cmd-output-base: SMC32 function identifier to read the physical
+ address of the output buffer
+
+Example:
+
+ #include <dt-bindings/firmware/meson-gxbb-sm.h>
+
+ ...
+
+ firmware {
+ compatible = "simple-bus";
+
+ sm: secure-monitor {
+ compatible = "amlogic,meson-sm";
+ amlogic,sm-cmd-input-base = <SM_GET_SHARE_MEM_INPUT_BASE>;
+ amlogic,sm-cmd-output-base = <SM_GET_SHARE_MEM_OUTPUT_BASE>;
+ };
+ };
+
+Node of a device using the secure monitor must have a custom property to
+specify the SMC32 function the driver is going to use. The values of all the
+SMC function identifiers are listed in a SoC-specific header file:
+
+"include/dt-bindings/firmware/meson-gxbb-sm.h" - for the Meson GXBB secure monitor.
+
+Example of the node using the secure monitor:
+
+ #include <dt-bindings/firmware/meson-gxbb-sm.h>
+
+ ...
+
+ efuse: efuse {
+ compatible = "amlogic,meson-gxbb-efuse";
+ secure-monitor = <&sm>;
+ amlogic,sm-cmd-read-efuse = <SM_EFUSE_READ>;
+ amlogic,sm-cmd-max-efuse = <SM_EFUSE_USER_MAX>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ...
+ };
+
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
