Hi Eduardo, On Mon, 18 Nov 2013 10:27:41 -0400, Eduardo Valentin wrote: > The patch series have been looked and contributed by several people and > a couple o maintainers now. Starts to be way better than the original > RFC. The core idea still holds though. I have no objection to the core idea, it's great :-) > >> (...) > >> /*-----------------------------------------------------------------------*/ > >> > >> +static inline long lm75_reg_to_mc(s16 temp, u8 resolution) > >> +{ > >> + return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8); > >> +} > >> + > >> /* sysfs attributes for hwmon */ > >> > >> +static int lm75_read_temp(void *dev, long *temp) > >> +{ > >> + struct lm75_data *data = lm75_update_device(dev); > >> + > >> + if (IS_ERR(data)) > >> + return PTR_ERR(data); > >> + > >> + *temp = lm75_reg_to_mc(data->temp[0], data->resolution); > >> + > >> + return 0; > >> +} > >> + > >> static ssize_t show_temp(struct device *dev, struct device_attribute *da, > >> char *buf) > >> { > >> struct sensor_device_attribute *attr = to_sensor_dev_attr(da); > >> struct lm75_data *data = lm75_update_device(dev); > >> - long temp; > >> > >> if (IS_ERR(data)) > >> return PTR_ERR(data); > >> > >> - temp = ((data->temp[attr->index] >> (16 - data->resolution)) * 1000) > >> - >> (data->resolution - 8); > >> - > >> - return sprintf(buf, "%ld\n", temp); > >> + return sprintf(buf, "%ld\n", lm75_reg_to_mc(data->temp[attr->index], > >> + data->resolution)); > >> } > > > > I am a bit worried by this. I did expect that you'd have to split a > > piece of show_temp() into one separate function, not two. Here you have > > quite some redundancy between lm75_read_temp and show_temp. Sure these > > are small functions so the duplicate code is limited, but if you > > multiply by the number of hwmon drivers which are candidates for this > > change, this all adds up. > > Can you please elaborate a bit more on which way you think the code > above shall be improved? Are you suggesting we should make show_temp > call lm75_read_temp? Yes, that's pretty much what I had in mind. > On this specific case, I believe the code > duplication is minor, although I haven't measured. I do agree the duplication in a single driver is minor. However I expect more hwmon drivers to be converted to cooperate with the thermal subsystem in the future. Duplicated code adds up, in terms of build time, storage space and run-time memory consumption. Plus it hurts CPU caching even though I don't expect these code paths to be particularly hot. OTOH I suppose that the compiler will inline lm75_reg_to_mc() in this specific case, saving one function call. It wouldn't possibly inline lm75_read_temp() so it is quite possible that your implementation actually performs better than what I am suggesting. We're speaking of hardly measurable differences anyway. My other point below is probably more important... > >> > >> static ssize_t set_temp(struct device *dev, struct device_attribute *da, > >> @@ -271,6 +288,13 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id) > >> goto exit_remove; > >> } > >> > >> + data->tz = thermal_zone_of_sensor_register(&client->dev, > >> + 0, > >> + &client->dev, > >> + lm75_read_temp, NULL); > > > > I am also worried by this interface. Basically a separate callback > > function (here lm75_read_temp) is needed for every thermal input. Some > > hwmon drivers have many of these! This will result in duplicate code > > The code registering a callback can actually have a private data, in > case you need to differentiate between inputs or in case you need to > derive specific data in order to access the correct input. Are you talking about void *dev? OK, you can virtually pass anything in that pointer, but... > > again. If you could just pass a sensor ID as an extra parameter to > > lm75_read_temp, you could use the same callback for all sensors. This > > Wouldn't the private pointer be enough? I am worried that this won't be practical at all for the real world cases. I expect that most drivers will need to pass the device plus one index-like value. Having a single void pointer for that is certainly flexible but it will also be inefficient, as every driver will have to define its own custom structure to embed the needed information. You _do_ pass a sensor_id to thermal_zone_of_sensor_register() so it shouldn't be hard to pass it to the callback function(s) as well (assuming the indexing in the device tree matches the one done by the driver - I certainly hope so.) I'd even suggest passing the device unconditionally too, as I just can't see how a driver could do without it. If you pass the right parameters then you may not even need a void pointer. > I think it is a matter of checking what is the best way for the > candidates of users of this new API. I agree. But two drivers are probably too few to make an educated decision, I suppose we'll need to convert some more to get a clearer view. Note that most things can be changed later if needed, so my comments aren't meant to block the integration of your patches. > In theory it is enough to hold the > ID on the data structure you pass through the void * parameter. However, > that would cause less impact if you have the users of the API already > structured in that way. Let me know what is best for your case. We do not have that structure (struct device *, int index) ready yet, so we'd have to add it to every driver with more than one input. We could have a generic structure for that in some header file, to avoid the duplicated work, but if we need to do that, I'd say this is a good hint that we settled for the wrong API in the first place. > > (...) > > I also note the lack of support for limits. Thermal zones can have > > limits, and the various hwmon drivers do support that, yet your > > interface offers no possibility to expose them. Wouldn't that be useful? No comment on that? I'd expect the get_temp() callback to take an extra parameter so that it can return the value of a specific subfeature, for example INPUT, HOT, CRITICAL etc. Or leave get_temp() as is but add a get_trip_temp() callback to retrieve limit information (not sure if thermal zones can have more than one limit?) I think thermal zones support hysteresis as well, and so do many hwmon drivers. It seems unfortunate that your proposed "bridge" between the hwmon and thermal subsystems doesn't map all the features which are supported on both sides. > >> + if (IS_ERR(data->tz)) > >> + data->tz = NULL; > > > > If you are doing that in all drivers, I would question the point of > > having thermal_zone_of_sensor_register() return a PTR_ERR in the first > > place. > > Yeah, maybe it should simply return NULL in the fail path and drivers > would not need to bother about it. What do you think? I think exactly what I wrote above, no more no less. I don't think I can add anything, and the decision is up to you. -- Jean Delvare -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html