Re: [PATCH] ARM: dts: exynos: Add MFC memory banks for Peach boards

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hello Krzysztof,

On 05/06/2016 09:58 AM, Krzysztof Kozlowski wrote:
> On 05/06/2016 03:44 PM, Javier Martinez Canillas wrote:
>> Hello Krzysztof,
>>
>> On 04/28/2016 03:21 PM, Javier Martinez Canillas wrote:
>>> The MFC nodes with the memory regions reserved for memory allocations
>>> are missing in the Exynos5420 Peach Pit and Exynos5800 Peach Pi DTS.
>>>
>>> This causes the s5p-mfc driver probe to fail with the following error:
>>>
>>> [    4.140647] s5p_mfc_alloc_memdevs:1072: Failed to declare coherent memory for MFC device
>>> [    4.216163] s5p-mfc: probe of 11000000.codec failed with error -12
>>>
>>> Add the missing nodes so the driver probes and the {en,de}coder video
>>> nodes are registered correctly:
>>>
>>> [    4.096277] s5p-mfc 11000000.codec: decoder registered as /dev/video4
>>> [    4.102282] s5p-mfc 11000000.codec: encoder registered as /dev/video5
>>>
>>> Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
>>>
>>> ---
>>>
>>>  arch/arm/boot/dts/exynos5420-peach-pit.dts | 5 +++++
>>>  arch/arm/boot/dts/exynos5800-peach-pi.dts  | 5 +++++
>>>  2 files changed, 10 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
>>> index b644858231b6..f9d2e4f1a0e0 100644
>>> --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
>>> +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
>>> @@ -694,6 +694,11 @@
>>>  	status = "okay";
>>>  };
>>>  
>>> +&mfc {
>>> +	samsung,mfc-r = <0x43000000 0x800000>;
>>> +	samsung,mfc-l = <0x51000000 0x800000>;
>>> +};
>>> +
>>>  &mmc_0 {
>>>  	status = "okay";
>>>  	num-slots = <1>;
>>> diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
>>> index 6ba9aec15485..62ceb89e073f 100644
>>> --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
>>> +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
>>> @@ -669,6 +669,11 @@
>>>  	status = "okay";
>>>  };
>>>  
>>> +&mfc {
>>> +	samsung,mfc-r = <0x43000000 0x800000>;
>>> +	samsung,mfc-l = <0x51000000 0x800000>;
>>> +};
>>> +
>>>  &mmc_0 {
>>>  	status = "okay";
>>>  	num-slots = <1>;
>>>
>>
>> Any comments about this patch?
> 
> What is up with the rush now (a week for ping)? As I understand, this

Sorry about that... I should had waited for more time for the ping indeed.
I just thought the patch was trivial and you usually answer within days.

> was broken for very long time on these boards (since adding DT support
> in 2012?).
> 

Yes, that's correct. And in fact even the s5p-mfc driver is currently
not working in mainline. But I posted some fixes and will post more
patches from other people today to get it working. So I thought that
would be nice to have this in since one of my test machines is a Peach.

> Best regards,
> Krzysztof
>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux