On Tue, May 03, 2016 at 10:13:31AM -0700, Grant Grundler wrote: > Add I2C driver for AtmegaXX capacitive touch device. > > Signed-off-by: Hung-yu Wu <hywu@xxxxxxxxxx> > Signed-off-by: Grant Grundler <grundler@xxxxxxxxxxxx> > --- > .../bindings/input/atmel,atmegaxx_captouch.txt | 34 +++ It is generally preferred that bindings are a separate patch. > drivers/input/misc/Kconfig | 11 + > drivers/input/misc/Makefile | 1 + > drivers/input/misc/atmegaxx_captouch.c | 278 +++++++++++++++++++++ > 4 files changed, 324 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/atmel,atmegaxx_captouch.txt > create mode 100644 drivers/input/misc/atmegaxx_captouch.c > > For those that like to know how sausage is made, ChromeOS code review history here: > https://chromium-review.googlesource.com/339950 > > Driver was tested with prototype HW and it reliably reports events correctly. > Manual testing was just using "evtest /dev/input/event0" and watch for events. > > diff --git a/Documentation/devicetree/bindings/input/atmel,atmegaxx_captouch.txt b/Documentation/devicetree/bindings/input/atmel,atmegaxx_captouch.txt > new file mode 100644 > index 0000000..07a4b0b > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/atmel,atmegaxx_captouch.txt > @@ -0,0 +1,34 @@ > +Device tree bindings for Atmel AtmegaXX capacitive touch sensor > + > +The node for this device must be a child of a I2C controller node, as the > +device communicates via I2C. > + > +Required properties: > + > + compatible: Must be "atmel,atmegaxx_captouch". No wildcards in the compatible strings. Use the specific devices. Also, use hyphen rather than underscore. However, if the device is only a touch controller, then '_captouch' is not needed. The part number is sufficient to identify the device. > + reg: The I2C slave address of the device. > + interrupts: Property describing the interrupt line the device > + is connected to. The device only has one interrupt > + source. > + linux,keycodes: Specifies an array of numeric keycode values to > + be used for reporting button presses. The array can > + contain up to 8 entries. > + > +Optional properties: > + > + autorepeat: Enables the Linux input system's autorepeat > + feature on the input device. > + > +Example: > + > + atmegaxx_captouch@51 { atmegaxx@51 (with actual part number) > + compatible = "atmel,atmegaxx_captouch"; > + reg = <0x51>; > + interrupt-parent = <&tlmm>; > + interrupts = <67 IRQ_TYPE_EDGE_FALLING>; > + linux,keycodes = <BTN_0>, <BTN_1>, > + <BTN_2>, <BTN_3>, > + <BTN_4>, <BTN_5>, > + <BTN_6>, <BTN_7>; > + autorepeat; > + }; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
