Some cleanups:
- Use simpler names for DT nodes in the example
- Fix phandle for specifying data lane mapping in the example.
- Use references instead of dumping Document links everywhere
Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/display/msm/dsi.txt | 23 +++++++++++-----------
1 file changed, 12 insertions(+), 11 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index f5948c4..bf41d7c 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -11,8 +11,7 @@ Required properties:
be 0 or 1, since we have 2 DSI controllers at most for now.
- interrupts: The interrupt signal from the DSI block.
- power-domains: Should be <&mmcc MDSS_GDSC>.
-- clocks: device clocks
- See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+- clocks: Phandles to device clocks as descirbed in [1]
- clock-names: the following clocks are required:
* "mdp_core_clk"
* "iface_clk"
@@ -31,8 +30,7 @@ Required properties:
Optional properties:
- panel@0: Node of panel connected to this DSI controller.
- See files in Documentation/devicetree/bindings/display/panel/ for each supported
- panel.
+ See files in [2] for each supported panel.
- qcom,dual-dsi-mode: Boolean value indicating if the DSI controller is
driving a panel which needs 2 DSI links.
- qcom,master-dsi: Boolean value indicating if the DSI controller is driving
@@ -48,7 +46,7 @@ Optional properties:
DSI Endpoint properties:
- remote-endpoint: set to phandle of the connected panel's endpoint.
- See Documentation/devicetree/bindings/graph.txt for device graph info.
+ See [3] for device graph info.
- qcom,data-lane-map: this describes how the logical DSI lanes are mapped
to the physical lanes on the given platform. The value contained in
index n describes what logical data lane is mapped to the physical data
@@ -89,8 +87,7 @@ Required properties:
- qcom,dsi-phy-index: The ID of DSI PHY hardware instance. This should
be 0 or 1, since we have 2 DSI PHYs at most for now.
- power-domains: Should be <&mmcc MDSS_GDSC>.
-- clocks: device clocks
- See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+- clocks: Phandles to device clocks as descirbed in [1]
- clock-names: the following clocks are required:
* "iface_clk"
- vddio-supply: phandle to vdd-io regulator device node
@@ -99,8 +96,12 @@ Optional properties:
- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY
regulator is wanted.
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/display/panel/
+[3] Documentation/devicetree/bindings/graph.txt
+
Example:
- mdss_dsi0: qcom,mdss_dsi@fd922800 {
+ dsi0: dsi@fd922800 {
compatible = "qcom,mdss-dsi-ctrl";
qcom,dsi-host-index = <0>;
interrupt-parent = <&mdss_mdp>;
@@ -128,7 +129,7 @@ Example:
vdd-supply = <&pma8084_l22>;
vddio-supply = <&pma8084_l12>;
- qcom,dsi-phy = <&mdss_dsi_phy0>;
+ qcom,dsi-phy = <&dsi_phy0>;
qcom,dual-dsi-mode;
qcom,master-dsi;
@@ -156,12 +157,12 @@ Example:
port {
dsi0_out: endpoint {
remote-endpoint = <&panel_in>;
- lanes = <0 1 2 3>;
+ qcom,data-lane-map = <0 1 2 3>;
};
};
};
- mdss_dsi_phy0: qcom,mdss_dsi_phy@fd922a00 {
+ dsi_phy0: dsi_phy@fd922a00 {
compatible = "qcom,dsi-phy-28nm-hpm";
qcom,dsi-phy-index = <0>;
reg-names =
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
