The MDP DT node now contains a list of ports that describe how it connects
to external encoder interfaces like DSI and HDMI. These follow the
standard of_graph bindings, and allow us to get rid of the 'connectors'
phandle that contained a list of all the external encoders connected to
MDP.
The GPU phandle is removed too until we figure out what's the right way
to specify it in DT.
Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/display/msm/mdp.txt | 75 ++++++++++++++++++++--
1 file changed, 71 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/msm/mdp.txt b/Documentation/devicetree/bindings/display/msm/mdp.txt
index a214f6c..5f6ae3c 100644
--- a/Documentation/devicetree/bindings/display/msm/mdp.txt
+++ b/Documentation/devicetree/bindings/display/msm/mdp.txt
@@ -6,7 +6,6 @@ Required properties:
* "qcom,mdp5" - mdp5
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt signal from the display controller.
-- connectors: array of phandles for output device(s)
- clocks: device clocks
See ../clocks/clock-bindings.txt for details.
- clock-names: the following clocks are required.
@@ -24,9 +23,33 @@ Required properties:
* "core_clk"
* "lut_clk" (some MDP5 versions may not need this)
* "vsync_clk"
+- ports: contains the list of output ports from MDP. These connect to interfaces
+ that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a
+ special case since it is a part of the MDP block itself).
+
+ Each output port contains an endpoint that describes how it is connected to an
+ external interface. These are described by the standard properties documented
+ here:
+ Documentation/devicetree/bindings/graph.txt
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+
+ For MDP4, the output port mappings are:
+ Port 0 -> LCDC/LVDS
+ Port 1 -> DSI1 Cmd/Video
+ Port 2 -> DSI2 Cmd/Video
+ Port 3 -> DTV
+
+ For MDP5, the availability of output ports vary across each SoC revision, but
+ they generally have the following mapping:
+ Port 0 -> MDP_INTF0 (eDP)
+ Port 1 -> MDP_INTF1 (DSI1)
+ Port 2 -> MDP_INTF2 (DSI2)
+ Port 3 -> MDP_INTF3 (HDMI)
+
+ See drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c to see what all INTFs a particular
+ SoC revision has enabled.
Optional properties:
-- gpus: phandle for gpu device
- clock-names: the following clocks are optional:
* "lut_clk"
@@ -35,11 +58,25 @@ Example:
/ {
...
- mdp: qcom,mdp@5100000 {
+ hdmi: hdmi@4a00000 {
+ ...
+ ports {
+ ...
+ port@0 {
+ reg = <0>;
+ hdmi_in: endpoint {
+ remote-endpoint = <&mdp_dtv_out>;
+ };
+ };
+ ...
+ };
+ ...
+ };
+
+ mdp: mdp@5100000 {
compatible = "qcom,mdp4";
reg = <0x05100000 0xf0000>;
interrupts = <GIC_SPI 75 0>;
- connectors = <&hdmi>;
gpus = <&gpu>;
clock-names =
"core_clk",
@@ -55,5 +92,35 @@ Example:
<&mmcc TV_SRC>,
<&mmcc HDMI_TV_CLK>,
<&mmcc MDP_TV_CLK>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdp_lvds_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdp_dsi1_out: endpoint {
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ mdp_dsi2_out: endpoint {
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ mdp_dtv_out: endpoint {
+ remote-endpoint = <&hdmi_in>;
+ };
+ };
+ };
};
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
