On Sun, May 01, 2016 at 06:01:08PM +0200, Hans Verkuil wrote: > > Sorry, I meant the hanging issue I got in 4.6, not the ethernet issue. > > I get the same problem with linux-next. Can you mail me the .config you are using? > > Never mind. > > > After some more testing I don't think it is hanging, instead it seems that the mmc > > isn't enabled/found and so it just sits waiting for the root partition to appear. > > That was fun. There are two problems that both caused the boot to end at the same > place: first of all the root partition is now called mmcblk1p1 instead of mmcblk0p1 > in 4.6, so it was just waiting for the root partition to appear. Nothing to do with > your patch series, just unexpected. Yes, annoying issue and unfortunately this is known... recommended solution is to use root=PARTUUID=xxxx (you can get the PARTUUID with blkid)... or replace the mmc device. > The second is that enabling CONFIG_VIDEO_S5P_FIMC causes the boot to hang at that > same place. I suspect there is a deadlock somewhere. I'm digging deeper into that > but again, unrelated to your patch series. > > Anyway, after disabling that config option I was finally able to test your patch > series: > > Tested-by: Hans Verkuil <hans.verkuil@xxxxxxxxx> Thanks! Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html