Re: strange dtc errors after adding sram node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Stefan,

On Sa, 2016-04-23 at 09:46 +0200, Stefan Wahren wrote:
> Hi,
> 
> i want to add an sram node to arch/arm/boot/dts/imx28.dtsi. According
> to 
> the reference manual [1] the On-Chip RAM is connected to AHB, start 
> address 0 and has a size of 128 KB.
> 
> So i modified the imx28.dtsi based on the patch below. Unfortunately
> the 
> dtc give me some strang errors:
> 
> ERROR (duplicate_label): Duplicate label 'mac0' on 
> /ahb@80080000/ethernet@800f0000 and /ahb@00000000/ethernet@800f0000
> ERROR: Input tree has errors, aborting (use -f to force output)
> 
> What's wrong with my patch or does it reveal another issue?
> 
> Regards
> Stefan
> 
> [1] - http://cache.freescale.com/files/dsp/doc/ref_manual/MCIMX28RM.p
> df
> i.MX28 Applications Processor Reference Manual, Rev. 2, 08/2013
> Chapter 4.1 Memory Map Overview
> 
> -------------------------->8---------------------------------------
> --- a/arch/arm/boot/dts/imx28.dtsi
> +++ b/arch/arm/boot/dts/imx28.dtsi
> @@ -1311,13 +1311,18 @@
>   		};
>   	};
> 
> -	ahb@80080000 {
> +	ahb@00000000 {
>   		compatible = "simple-bus";
>   		#address-cells = <1>;
>   		#size-cells = <1>;
> -		reg = <0x80080000 0x80000>;
> +		reg = <0x00000000 0x20000>, <0x80080000 0x80000>;
>   		ranges;
> 
> +		ocram: sram@00000000 {
> +			compatible = "mmio-sram";
> +			reg = <0x00000000 0x20000>;
> +		};
> +
>   		usb0: usb@80080000 {
>   			compatible = "fsl,imx28-usb", "fsl,imx27-
> usb";
>   			reg = <0x80080000 0x10000>;

Follwing the address map for the i.MX28 (p. 125ff) the AHB is mapped to
different start addresses:

Bus	MNEMONIC	START ADDRESS
--------------------------------------
AHB	OCRAM 		0x00000000
AHB	USBCTRL0	0x80080000
AHB	OCROM		0xC0000000

So instead of replacing ahb@80080000 by ahb@00000000 a new node should
be created. However, I am not sure if this is really necessary, I
haven't seen it for all device trees using "mmio-sram".

Best regards
Jörg Krause
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux