On Wed, 2016-04-20 at 07:55:27 -0700, Appana Durga Kedareswara Rao wrote: > Hi Soren, > > > -----Original Message----- > > From: Sören Brinkmann [mailto:soren.brinkmann@xxxxxxxxxx] > > Sent: Wednesday, April 20, 2016 8:06 PM > > To: Appana Durga Kedareswara Rao <appanad@xxxxxxxxxx> > > Cc: robh+dt@xxxxxxxxxx; pawel.moll@xxxxxxx; mark.rutland@xxxxxxx; > > ijc+devicetree@xxxxxxxxxxxxxx; galak@xxxxxxxxxxxxxx; Michal Simek > > <michals@xxxxxxxxxx>; vinod.koul@xxxxxxxxx; dan.j.williams@xxxxxxxxx; > > Appana Durga Kedareswara Rao <appanad@xxxxxxxxxx>; > > moritz.fischer@xxxxxxxxx; laurent.pinchart@xxxxxxxxxxxxxxxx; > > luis@xxxxxxxxxxxxxxxxx; Anirudha Sarangi <anirudh@xxxxxxxxxx>; Punnaiah > > Choudary Kalluri <punnaia@xxxxxxxxxx>; Shubhrajyoti Datta > > <shubhraj@xxxxxxxxxx>; devicetree@xxxxxxxxxxxxxxx; linux-arm- > > kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; > > dmaengine@xxxxxxxxxxxxxxx > > Subject: Re: [PATCH v2 2/2] dmaengine: vdma: Add clock support > > > > On Wed, 2016-04-20 at 17:13:19 +0530, Kedareswara rao Appana wrote: > > > Added basic clock support. The clocks are requested at probe and > > > released at remove. > > > > > > Signed-off-by: Kedareswara rao Appana <appanad@xxxxxxxxxx> > > > --- > > > Changes for v2: > > > --> None. > > > > > > drivers/dma/xilinx/xilinx_vdma.c | 56 > > > ++++++++++++++++++++++++++++++++++++++++ > > > 1 file changed, 56 insertions(+) > > > > > > diff --git a/drivers/dma/xilinx/xilinx_vdma.c > > > b/drivers/dma/xilinx/xilinx_vdma.c > > > index 70caea6..d526029 100644 > > > --- a/drivers/dma/xilinx/xilinx_vdma.c > > > +++ b/drivers/dma/xilinx/xilinx_vdma.c > > > @@ -44,6 +44,7 @@ > > > #include <linux/of_platform.h> > > > #include <linux/of_irq.h> > > > #include <linux/slab.h> > > > +#include <linux/clk.h> > > > > > > #include "../dmaengine.h" > > > > > > @@ -352,6 +353,8 @@ struct xilinx_dma_chan { > > > * @flush_on_fsync: Flush on frame sync > > > * @ext_addr: Indicates 64 bit addressing is supported by dma device > > > * @dmatype: DMA ip type > > > + * @clks: pointer to array of clocks > > > + * @numclks: number of clocks available > > > */ > > > struct xilinx_dma_device { > > > void __iomem *regs; > > > @@ -362,6 +365,8 @@ struct xilinx_dma_device { > > > u32 flush_on_fsync; > > > bool ext_addr; > > > enum xdma_ip_type dmatype; > > > + struct clk **clks; > > > + int numclks; > > > }; > > > > > > /* Macros */ > > > @@ -1731,6 +1736,26 @@ int xilinx_vdma_channel_set_config(struct > > > dma_chan *dchan, } EXPORT_SYMBOL(xilinx_vdma_channel_set_config); > > > > > > +static int xdma_clk_init(struct xilinx_dma_device *xdev, bool enable) > > > +{ > > > + int i = 0, ret; > > > + > > > + for (i = 0; i < xdev->numclks; i++) { > > > + if (enable) { > > > + ret = clk_prepare_enable(xdev->clks[i]); > > > + if (ret) { > > > + dev_err(xdev->dev, > > > + "failed to enable the axidma clock\n"); > > > + return ret; > > > + } > > > + } else { > > > + clk_disable_unprepare(xdev->clks[i]); > > > + } > > > + } > > > + > > > + return 0; > > > +} > > > + > > > /* ----------------------------------------------------------------------------- > > > * Probe and remove > > > */ > > > @@ -1919,6 +1944,7 @@ static int xilinx_dma_probe(struct platform_device > > *pdev) > > > struct resource *io; > > > u32 num_frames, addr_width; > > > int i, err; > > > + const char *str; > > > > > > /* Allocate and initialize the DMA engine structure */ > > > xdev = devm_kzalloc(&pdev->dev, sizeof(*xdev), GFP_KERNEL); @@ > > > -1965,6 +1991,32 @@ static int xilinx_dma_probe(struct platform_device > > *pdev) > > > /* Set the dma mask bits */ > > > dma_set_mask(xdev->dev, DMA_BIT_MASK(addr_width)); > > > > > > + xdev->numclks = of_property_count_strings(pdev->dev.of_node, > > > + "clock-names"); > > > + if (xdev->numclks > 0) { > > > + xdev->clks = devm_kmalloc_array(&pdev->dev, xdev->numclks, > > > + sizeof(struct clk *), > > > + GFP_KERNEL); > > > + if (!xdev->clks) > > > + return -ENOMEM; > > > + > > > + for (i = 0; i < xdev->numclks; i++) { > > > + of_property_read_string_index(pdev->dev.of_node, > > > + "clock-names", i, &str); > > > + xdev->clks[i] = devm_clk_get(xdev->dev, str); > > > + if (IS_ERR(xdev->clks[i])) { > > > + if (PTR_ERR(xdev->clks[i]) == -ENOENT) > > > + xdev->clks[i] = NULL; > > > + else > > > + return PTR_ERR(xdev->clks[i]); > > > + } > > > + } > > > + > > > + err = xdma_clk_init(xdev, true); > > > + if (err) > > > + return err; > > > + } > > > > I guess this works, but the relation to the binding is a little loose, IMHO. Instead > > of using the clock names from the binding this is just using whatever is provided > > in DT and enabling it. Also, all the clocks here are handled as optional feature, > > while binding - and I guess reality too - have them as mandatory. > > It would be nicer if the driver specifically asks for the clocks it needs and return > > an error if a mandatory clock is missing. > > Here DMA channels are configurable I mean if user select only mm2s channel then we will have > Only 3 clocks. If user selects both mm2s and s2mm channels we will have 5 clocks. > That’s why reading the number of clocks from the clock-names property. > > And also the AXI DMA/CDMA Ip support also getting added to this driver for those IP's also the clocks are configurable > For AXI DMA it is either 3 or 4 clocks and for AXI CDMA it is 2 clocks. > > That's why I thought it is the proper solution. > > If you have any better idea please let me know will try in that way... I guess the driver know all these things: whether it controls vdma or cdma, what interfaces it has and how many channels? Based on that, I guess it should be possible to derive what clocks are required for correct operation. Sören -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
