Re: [PATCH v1 1/1] add missing UARTs pins for AllWinner H3 DTS + add new I2C entries for AllWinner H3 DTS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi,

On Sat, Apr 16, 2016 at 1:11 AM, Martin Ayotte <martinayotte@xxxxxxxxx> wrote:
> Hi everyone,
>
> This patch is submit to provide endusers access to additional UARTs on
> AllWinner H3 SoC along with I2C ports.
>
> Regards,
> Martin.
> ---
>  arch/arm/boot/dts/sun8i-h3-orangepi-2.dts  | 36 ++++++++++++++
>  arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 36 ++++++++++++++
>  arch/arm/boot/dts/sun8i-h3.dtsi            | 75

First of all, you are touching 3 different files here. These should
be separate patches.

Secondly, our policy is to not have a default function for generic GPIO pins.


Regards
ChenYu

> ++++++++++++++++++++++++++++++
>  3 files changed, 147 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
> b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
> index f93f5d1..f0b9823 100644
> --- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
> @@ -176,6 +176,42 @@
>         status = "okay";
>  };
>
> +&uart1 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&uart1_pins_a>;
> +       status = "okay";
> +};
> +
> +&uart2 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&uart2_pins_a>;
> +       status = "okay";
> +};
> +
> +&uart3 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&uart3_pins_a>;
> +       status = "okay";
> +};
> +
> +&i2c0 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&i2c0_pins_a>;
> +       status = "okay";
> +};
> +
> +&i2c1 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&i2c1_pins_a>;
> +       status = "okay";
> +};
> +
> +&i2c2 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&i2c2_pins_a>;
> +       status = "okay";
> +};
> +
>  &usb1_vbus_pin_a {
>         allwinner,pins = "PG13";
>  };
> diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
> b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
> index daf50b9a6..6994349 100644
> --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
> @@ -161,6 +161,42 @@
>         status = "okay";
>  };
>
> +&uart1 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&uart1_pins_a>;
> +       status = "okay";
> +};
> +
> +&uart2 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&uart2_pins_a>;
> +       status = "okay";
> +};
> +
> +&uart3 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&uart3_pins_a>;
> +       status = "okay";
> +};
> +
> +&i2c0 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&i2c0_pins_a>;
> +       status = "okay";
> +};
> +
> +&i2c1 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&i2c1_pins_a>;
> +       status = "okay";
> +};
> +
> +&i2c2 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&i2c2_pins_a>;
> +       status = "okay";
> +};
> +
>  &usbphy {
>         /* USB VBUS is always on */
>         status = "okay";
> diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi
> b/arch/arm/boot/dts/sun8i-h3.dtsi
> index 4a4926b..c947360d 100644
> --- a/arch/arm/boot/dts/sun8i-h3.dtsi
> +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
> @@ -508,6 +508,48 @@
>                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>                         };
>
> +                       uart1_pins_a: uart1@0 {
> +                               allwinner,pins = "PG6", "PG7";
> +                               allwinner,function = "uart1";
> +                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +                       };
> +
> +                       uart2_pins_a: uart2@0 {
> +                               allwinner,pins = "PA0", "PA1";
> +                               allwinner,function = "uart2";
> +                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +                       };
> +
> +                       uart3_pins_a: uart3@0 {
> +                               allwinner,pins = "PA13", "PA14";
> +                               allwinner,function = "uart3";
> +                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +                       };
> +
> +                       i2c0_pins_a: i2c0@0 {
> +                               allwinner,pins = "PA11", "PA12";
> +                               allwinner,function = "i2c0";
> +                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +                       };
> +
> +                       i2c1_pins_a: i2c1@0 {
> +                               allwinner,pins = "PA18", "PA19";
> +                               allwinner,function = "i2c1";
> +                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +                       };
> +
> +                       i2c2_pins_a: i2c2@0 {
> +                               allwinner,pins = "PE12", "PE13";
> +                               allwinner,function = "i2c2";
> +                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +                       };
> +
>                         mmc0_pins_a: mmc0@0 {
>                                 allwinner,pins = "PF0", "PF1", "PF2", "PF3",
>                                                  "PF4", "PF5";
> @@ -626,6 +668,39 @@
>                         status = "disabled";
>                 };
>
> +               i2c0: i2c@01c2ac00 {
> +                       compatible = "allwinner,sun6i-a31-i2c";
> +                       reg = <0x01c2ac00 0x400>;
> +                       interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> +                       clocks = <&bus_gates 96>;
> +                       resets = <&apb2_rst 0>;
> +                       status = "disabled";
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +               };
> +
> +               i2c1: i2c@01c2b000 {
> +                       compatible = "allwinner,sun6i-a31-i2c";
> +                       reg = <0x01c2b000 0x400>;
> +                       interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +                       clocks = <&bus_gates 97>;
> +                       resets = <&apb2_rst 1>;
> +                       status = "disabled";
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +               };
> +
> +               i2c2: i2c@01c2b400 {
> +                       compatible = "allwinner,sun6i-a31-i2c";
> +                       reg = <0x01c2b400 0x400>;
> +                       interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> +                       clocks = <&bus_gates 98>;
> +                       resets = <&apb2_rst 2>;
> +                       status = "disabled";
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +               };
> +
>                 gic: interrupt-controller@01c81000 {
>                         compatible = "arm,cortex-a7-gic",
> "arm,cortex-a15-gic";
>                         reg = <0x01c81000 0x1000>,
> --
> 2.7.4
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux