Hi,
On Friday 15 April 2016 12:05 AM, David Lechner wrote:
> This is a new phy driver for the SoC USB controllers on the TI DA8xx
> family of microcontrollers. The USB 1.1 PHY is just a simple on/off.
> The USB 2.0 PHY also allows overriding the VBUS and ID pins.
>
> Signed-off-by: David Lechner <david@xxxxxxxxxxxxxx>
> ---
>
> v4 changes:
>
> * Using phy->ops->get_mode() instead of exporting symbol.
> * Using CFGCHIP(2) instead of CFGCHIP2_REG
> * Fixed da8xx_usb20_phy_* not matching ops.*
>
>
> drivers/phy/Kconfig | 10 ++
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-da8xx-usb.c | 245 ++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 256 insertions(+)
> create mode 100644 drivers/phy/phy-da8xx-usb.c
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 26566db..c1d315f 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -35,6 +35,16 @@ config ARMADA375_USBCLUSTER_PHY
> depends on OF && HAS_IOMEM
> select GENERIC_PHY
>
> +config PHY_DA8XX_USB
> + tristate "TI DA8xx USB PHY Driver"
> + depends on ARCH_DAVINCI_DA8XX
> + select GENERIC_PHY
> + select MFD_SYSCON
> + help
> + Enable this to support the USB PHY on DA8xx SoCs.
> +
> + This driver controls both the USB 1.1 PHY and the USB 2.0 PHY.
> +
> config PHY_DM816X_USB
> tristate "TI dm816x USB PHY driver"
> depends on ARCH_OMAP2PLUS
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 24596a9..722e01c 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -5,6 +5,7 @@
> obj-$(CONFIG_GENERIC_PHY) += phy-core.o
> obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
> obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
> +obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o
> obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
> obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
> obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
> diff --git a/drivers/phy/phy-da8xx-usb.c b/drivers/phy/phy-da8xx-usb.c
> new file mode 100644
> index 0000000..25847e6
> --- /dev/null
> +++ b/drivers/phy/phy-da8xx-usb.c
> @@ -0,0 +1,245 @@
> +/*
> + * phy-da8xx-usb - TI DaVinci DA8xx USB PHY driver
> + *
> + * Copyright (C) 2016 David Lechner <david@xxxxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
If it's GPL v2 or later, MODULE_LICENSE below should be GPL.
See include/linux/module.h
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/mfd/da8xx-cfgchip.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +struct da8xx_usbphy {
> + struct phy_provider *phy_provider;
> + struct phy *usb11_phy;
> + struct phy *usb20_phy;
> + struct clk *usb11_clk;
> + struct clk *usb20_clk;
> + struct regmap *regmap;
> +};
> +
> +static int da8xx_usb11_phy_power_on(struct phy *phy)
> +{
> + struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
> + int ret;
> +
> + ret = clk_prepare_enable(d_phy->usb11_clk);
> + if (ret)
> + return ret;
> +
> + regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_USB1SUSPENDM,
> + CFGCHIP2_USB1SUSPENDM);
> +
> + return 0;
> +}
> +
> +static int da8xx_usb11_phy_power_off(struct phy *phy)
> +{
> + struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
> +
> + regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_USB1SUSPENDM, 0);
> +
> + clk_disable_unprepare(d_phy->usb11_clk);
> +
> + return 0;
> +}
> +
> +static const struct phy_ops da8xx_usb11_phy_ops = {
> + .power_on = da8xx_usb11_phy_power_on,
> + .power_off = da8xx_usb11_phy_power_off,
> + .owner = THIS_MODULE,
> +};
> +
> +static int da8xx_usb20_phy_power_on(struct phy *phy)
> +{
> + struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
> + int ret;
> +
> + ret = clk_prepare_enable(d_phy->usb20_clk);
> + if (ret)
> + return ret;
> +
> + regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_OTGPWRDN, 0);
> +
> + return 0;
> +}
> +
> +static int da8xx_usb20_phy_power_off(struct phy *phy)
> +{
> + struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
> +
> + regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_OTGPWRDN,
> + CFGCHIP2_OTGPWRDN);
> +
> + clk_disable_unprepare(d_phy->usb20_clk);
> +
> + return 0;
> +}
> +
> +int da8xx_usb20_phy_set_mode(struct phy *phy, enum phy_mode mode)
> +{
this should be static.
> + struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
> + u32 val;
> +
> + switch (mode) {
> + case PHY_MODE_USB_HOST: /* Force VBUS valid, ID = 0 */
> + val = CFGCHIP2_OTGMODE_FORCE_HOST;
> + break;
> + case PHY_MODE_USB_DEVICE: /* Force VBUS valid, ID = 1 */
> + val = CFGCHIP2_OTGMODE_FORCE_DEVICE;
> + break;
> + case PHY_MODE_USB_OTG: /* Don't override the VBUS/ID comparators */
> + val = CFGCHIP2_OTGMODE_NO_OVERRIDE;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_OTGMODE_MASK, val);
> +
> + return 0;
> +}
> +
> +static const struct phy_ops da8xx_usb20_phy_ops = {
> + .power_on = da8xx_usb20_phy_power_on,
> + .power_off = da8xx_usb20_phy_power_off,
> + .set_mode = da8xx_usb20_phy_set_mode,
> + .owner = THIS_MODULE,
> +};
> +
> +static struct phy *da8xx_usbphy_of_xlate(struct device *dev,
> + struct of_phandle_args *args)
> +{
> + struct da8xx_usbphy *d_phy = dev_get_drvdata(dev);
> +
> + if (!d_phy)
> + return ERR_PTR(-ENODEV);
> +
> + switch (args->args[0]) {
> + case 0:
> + return d_phy->usb20_phy;
> + case 1:
> + return d_phy->usb11_phy;
> + default:
> + return ERR_PTR(-EINVAL);
> + }
> +}
> +
> +static int da8xx_usbphy_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *node = dev->of_node;
> + struct da8xx_usbphy *d_phy;
> +
> + d_phy = devm_kzalloc(dev, sizeof(*d_phy), GFP_KERNEL);
> + if (!d_phy)
> + return -ENOMEM;
> +
> + if (node)
> + d_phy->regmap = syscon_regmap_lookup_by_compatible(
> + "ti,da830-cfgchip");
> + else
> + d_phy->regmap = syscon_regmap_lookup_by_pdevname("syscon.0");
> + if (IS_ERR(d_phy->regmap)) {
> + dev_err(dev, "Failed to get syscon\n");
> + return PTR_ERR(d_phy->regmap);
> + }
> +
> + d_phy->usb11_clk = devm_clk_get(dev, "usb11_phy");
> + if (IS_ERR(d_phy->usb11_clk)) {
> + dev_err(dev, "Failed to get usb11_phy clock\n");
> + return PTR_ERR(d_phy->usb11_clk);
> + }
> +
> + d_phy->usb20_clk = devm_clk_get(dev, "usb20_phy");
> + if (IS_ERR(d_phy->usb20_clk)) {
> + dev_err(dev, "Failed to get usb20_phy clock\n");
> + return PTR_ERR(d_phy->usb20_clk);
> + }
> +
> + d_phy->usb11_phy = devm_phy_create(dev, node, &da8xx_usb11_phy_ops);
> + if (IS_ERR(d_phy->usb11_phy)) {
> + dev_err(dev, "Failed to create usb11 phy\n");
> + return PTR_ERR(d_phy->usb11_phy);
> + }
> +
> + d_phy->usb20_phy = devm_phy_create(dev, node, &da8xx_usb20_phy_ops);
> + if (IS_ERR(d_phy->usb20_phy)) {
> + dev_err(dev, "Failed to create usb20 phy\n");
> + return PTR_ERR(d_phy->usb20_phy);
> + }
> +
> + platform_set_drvdata(pdev, d_phy);
> + phy_set_drvdata(d_phy->usb11_phy, d_phy);
> + phy_set_drvdata(d_phy->usb20_phy, d_phy);
> +
> + if (node) {
> + d_phy->phy_provider = devm_of_phy_provider_register(dev,
> + da8xx_usbphy_of_xlate);
> + if (IS_ERR(d_phy->phy_provider)) {
> + dev_err(dev, "Failed to create phy provider\n");
> + return PTR_ERR(d_phy->phy_provider);
> + }
> + } else {
> + int ret;
> +
> + ret = phy_create_lookup(d_phy->usb11_phy, "usbphy", "ohci.0");
> + if (ret)
> + dev_warn(dev, "Failed to create usb11 phy lookup\n");
> + ret = phy_create_lookup(d_phy->usb20_phy, "usbphy", "musb-da8xx");
> + if (ret)
> + dev_warn(dev, "Failed to create usb20 phy lookup\n");
> + }
> +
> + return 0;
> +}
> +
> +static int da8xx_usbphy_remove(struct platform_device *pdev)
> +{
> + struct da8xx_usbphy *d_phy = platform_get_drvdata(pdev);
> +
> + if (!pdev->dev.of_node) {
> + phy_remove_lookup(d_phy->usb20_phy, "usbphy", "musb-da8xx");
> + phy_remove_lookup(d_phy->usb11_phy, "usbphy", "ohci.0");
> + }
> +
> + return 0;
> +}
> +
> +static const struct of_device_id da8xx_usbphy_ids[] = {
> + { .compatible = "ti,da830-usbphy" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, da8xx_usbphy_ids);
> +
> +static struct platform_driver da8xx_usbphy_driver = {
> + .probe = da8xx_usbphy_probe,
> + .remove = da8xx_usbphy_remove,
> + .driver = {
> + .name = "da8xx-usbphy",
> + .of_match_table = da8xx_usbphy_ids,
> + },
> +};
> +
> +module_platform_driver(da8xx_usbphy_driver);
> +
> +MODULE_ALIAS("platform:da8xx-usbphy");
> +MODULE_AUTHOR("David Lechner <david@xxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("TI DA8xx USB PHY driver");
> +MODULE_LICENSE("GPL v2");
Either this or the file header should be fixed.
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
