Hi, This is Mediatek MT8173 Command Queue(CMDQ) driver. The CMDQ is used to help read/write registers with critical time limitation, such as updating display configuration during the vblank. It controls Global Command Engine (GCE) hardware to achieve this requirement. These patches have a build dependency on top of v4.6-rc1. Changes since v3: - rebase to v4.6-rc1 - pass both arm and arm64 arch compilation - fix bug of removing free task list in v3 - marchal return error code - use offset instead of physical address - centralize release flow - add "suspend/resume protection" patch - add queue_work() in cmdq_auto_release() to prevent no more flush or interrupt to consume waiting tasks - remove some debug or redundant code - rewrite some code to shrink code size Best regards, HS Liao HS Liao (4): dt-bindings: soc: Add documentation for the MediaTek GCE unit CMDQ: Mediatek CMDQ driver arm64: dts: mt8173: Add GCE node CMDQ: suspend/resume protection .../devicetree/bindings/soc/mediatek/gce.txt | 34 + arch/arm64/boot/dts/mediatek/mt8173.dtsi | 8 + drivers/soc/mediatek/Kconfig | 10 + drivers/soc/mediatek/Makefile | 1 + drivers/soc/mediatek/mtk-cmdq.c | 1997 ++++++++++++++++++++ include/soc/mediatek/cmdq.h | 197 ++ 6 files changed, 2247 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/mediatek/gce.txt create mode 100644 drivers/soc/mediatek/mtk-cmdq.c create mode 100644 include/soc/mediatek/cmdq.h -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
