On 18 April 2016 at 11:38, Lars Persson <lars.persson@xxxxxxxx> wrote:
> From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
>
> The mmc core will only enable UHS modes if the host supports the
> .start_signal_voltage_switch() operation. Add this method to the v08r07
> driver even if there's actually nothing to do in it.
>
> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
> Signed-off-by: Phil Edworthy <phil@xxxxxxxxxxxxx>
> Signed-off-by: Lars Persson <larper@xxxxxxxx>
> ---
> drivers/mmc/host/usdhi6rol0.c | 32 ++++++++++++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
>
> diff --git a/drivers/mmc/host/usdhi6rol0.c b/drivers/mmc/host/usdhi6rol0.c
> index 807c06e..5dde31b 100644
> --- a/drivers/mmc/host/usdhi6rol0.c
> +++ b/drivers/mmc/host/usdhi6rol0.c
> @@ -23,6 +23,7 @@
> #include <linux/module.h>
> #include <linux/pagemap.h>
> #include <linux/platform_device.h>
> +#include <linux/regulator/consumer.h>
> #include <linux/scatterlist.h>
> #include <linux/string.h>
> #include <linux/time.h>
> @@ -1147,12 +1148,43 @@ static void usdhi6_enable_sdio_irq(struct mmc_host *mmc, int enable)
> }
> }
>
> +static int usdhi6_sig_volt_switch(struct mmc_host *mmc, struct mmc_ios *ios)
> +{
> + int ret;
> +
> + if (IS_ERR(mmc->supply.vqmmc))
> + return 0;
> +
> + switch (ios->signal_voltage) {
> + case MMC_SIGNAL_VOLTAGE_330:
> + ret = regulator_set_voltage(mmc->supply.vqmmc,
> + 2700000, 3600000);
> + break;
> + case MMC_SIGNAL_VOLTAGE_180:
> + ret = regulator_set_voltage(mmc->supply.vqmmc,
> + 1700000, 1950000);
> + break;
> + case MMC_SIGNAL_VOLTAGE_120:
> + ret = regulator_set_voltage(mmc->supply.vqmmc,
> + 1100000, 1300000);
> + break;
> + default:
> + return 0;
> + }
Please replace this switch statement with a call to
mmc_regulator_set_vqmmc() instead.
> +
> + if (ret < 0)
> + dev_warn(mmc_dev(mmc), "Voltage switch failed: %d\n", ret);
> +
> + return ret;
> +}
> +
> static struct mmc_host_ops usdhi6_ops = {
> .request = usdhi6_request,
> .set_ios = usdhi6_set_ios,
> .get_cd = usdhi6_get_cd,
> .get_ro = usdhi6_get_ro,
> .enable_sdio_irq = usdhi6_enable_sdio_irq,
> + .start_signal_voltage_switch = usdhi6_sig_volt_switch,
> };
>
> /* State machine handlers */
> --
> 2.1.4
>
Kind regards
Uffe
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
