On Friday 15 April 2016 09:47 PM, David Lechner wrote: > On 04/15/2016 05:24 AM, Sekhar Nori wrote: > >> >> This made me notice that num-cs is populated wrongly for spi1. It >> actually has 8 chip selects. This is fine though. > > I might as well fix it since I have to make changes anyway. Don't > remember how I came up with 6. In section 3.7.7 of datasheet, there are 6 possible chip selects listed for SPI0 and 8 possible chipselects for SPI1. If you are fixing SPI1, please make that a separate patch. >> Also, it will be nice to add pinctrl entries for spi0 like it is done >> for spi1. You will need those anyway for using the interface. > > I omitted this on purpose. For my use case, I am using the SPI as > write-only, so not using the SOMI pin, which is actually muxed as a GPIO > for something else. So having a pinctl like spi1 is of no use to me. I > figured if someone needs it, they can add it, otherwise it just is > wasted space to me. Alright, makes sense. Regards, Sekhar -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
