On Sunday 10 April 2016 07:37:23 Reizer, Eyal wrote: > Add support for using with both wl12xx and wl18xx. > > - all wilink family needs special init command for entering wspi mode. > extra clock cycles should be sent after the spi init command while the > cs pin is high. > - switch to controling the cs pin from the spi driver for achieveing the > above. > - the selected cs gpio is read from the spi device-tree node using the > cs-gpios field and setup as a gpio. > - See the example below for specifying the cs gpio using the cs-gpios entry > &spi0 { > ... > cs-gpios = <&gpio0 5 0>; > ... > wlcore: wlcore@0 { > compatible = "ti,wl1835"; > ... > ... > }; > }; > > Signed-off-by: Eyal Reizer <eyalr@xxxxxx> I don't think this can work in general: not all SPI hosts uses GPIOs for controlling CS, so the logic can't work, and it's also a layering violation for the driver to look at the parent. I would suggest fixing this using a new API function from the SPI core, if we don't already have a generic way to do it. Arnd -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html