Without that, regulators are left in the mode last set by the bootloader or by the kernel the device was rebooted from. This leads to various problems, like non-working peripherals. Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx> --- arch/arm/boot/dts/omap3-n900.dts | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index b3c26a9..d9e2d9c 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -329,6 +329,7 @@ regulator-name = "V28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ regulator-always-on; /* due to battery cover sensor */ }; @@ -336,30 +337,35 @@ regulator-name = "VCSI"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vaux3 { regulator-name = "VMMC2_30"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3000000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vaux4 { regulator-name = "VCAM_ANA_28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vmmc1 { regulator-name = "VMMC1"; regulator-min-microvolt = <1850000>; regulator-max-microvolt = <3150000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vmmc2 { regulator-name = "V28_A"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3000000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ regulator-always-on; /* due VIO leak to AIC34 VDDs */ }; @@ -367,6 +373,7 @@ regulator-name = "VPLL"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ regulator-always-on; }; @@ -374,6 +381,7 @@ regulator-name = "VSDI_CSI"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ regulator-always-on; }; @@ -381,6 +389,7 @@ regulator-name = "VMMC2_IO_18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vio { -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html