Re: [PATCH V3 1/2] thermal: generic-adc: Add DT binding for ADC based thermal sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Thu, Apr 14, 2016 at 08:11:17PM +0530, Laxman Dewangan wrote:
> Sometimes, thermal sensors like NCT thermistors are connected to
> the ADC channel. The temperature is read by reading the voltage
> across the sensor resistance via ADC and referring the lookup
> table for ADC value to temperature.
> 
> Add DT binding doc for the ADC based thermal sensor driver to
> detail the DT property and provide the example for how to use it.
> 
> Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
> 
> ---
> Changes from V1:
> - Make the lookup table to two dimensional instead of single array of linear
>   step of temperature.
> - Remove detailing of IIO frameowrk and drivers.
> - Added proper braces, indenting and labels.
> 
> Changes from V2:
> - Handle comment from Rob for detailing the first and second value of the array
>   and remove @ in the node name.
> 
>  .../bindings/thermal/thermal-generic-adc.txt       | 89 ++++++++++++++++++++++
>  1 file changed, 89 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt

Acked-by: Rob Herring <rob@xxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux