On Wed, Apr 13, 2016 at 10:46:48AM +0530, Kedareswara rao Appana wrote:
> Device-tree binding documentation for Xilinx zynqmp dma engine used in
> Zynq UltraScale+ MPSoC.
>
> Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xxxxxxxxxx>
> Signed-off-by: Kedareswara rao Appana <appanad@xxxxxxxxxx>
> ---
> Changes in v5:
> - Use dma-coherent flag for coherent transfers as suggested by rob.
> - Removed unnecessary properties from binding doc as suggested by Rob.
> Changes in v4:
> - None
> Changes in v3:
> - None
> Changes in v2:
> - None.
>
> .../devicetree/bindings/dma/xilinx/zynqmp_dma.txt | 50 ++++++++++++++++++++++
> 1 file changed, 50 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
>
> diff --git a/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
> new file mode 100644
> index 0000000..4ad0aea40
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
> @@ -0,0 +1,50 @@
> +Xilinx ZynqMP DMA engine, it does support memory to memory transfers,
> +memory to device and device to memory transfers. It also has flow
> +control and rate control support for slave/peripheral dma access.
> +
> +Required properties:
> +- compatible : Should be "xlnx,zynqmp-dma-1.0"
> +- reg : Memory map for gdma/adma module access.
> +- interrupt-parent : Interrupt controller the interrupt is routed through
> +- interrupts : Should contain DMA channel interrupt.
> +- xlnx,bus-width : Axi buswidth in bits. Should contain 128 or 64
> +- clock-names : List of input clocks "clk_main", "clk_apb"
> + (see clock bindings for details)
> +
> +Optional properties:
> +- xlnx,include-sg : Indicates the controller to operate in simple or
> + scatter gather dma mode
> +- xlnx,ratectrl : Scheduling interval in terms of clock cycles for
> + source AXI transaction
> +- xlnx,overfetch : Tells whether the channel is allowed to over
> + fetch the data
> +- xlnx,src-issue : Number of AXI outstanding transactions on source side
> +- xlnx,desc-axi-cache : AXI cache bits to be used for descriptor fetch
> +- xlnx,src-axi-cache : AXI cache bits to be used for data read
> +- xlnx,dst-axi-cache : AXI cache bits to be used for data write
Shouldn't you be able to derive these values from whether dma-coherent
is set. To put it another way, allowing setting both allows for lots of
broken combinations.
> +- xlnx,src-burst-len : AXI length for data read. Support only power of
> + 2 values.
> +- xlnx,dst-burst-len : AXI length for data write. Support only power of
> + 2 values.
What unit? Seems to be beats from the example. I would suggest bytes
instead.
> +- dma-coherent : Present if dma operations are coherent.
> +
> +Example:
> +++++++++
> +fpd_dma_chan1: dma@FD500000 {
lowercase address.
> + compatible = "xlnx,zynqmp-dma-1.0";
> + reg = <0x0 0xFD500000 0x1000>;
> + interrupt-parent = <&gic>;
> + interrupts = <0 117 4>;
> + clock-names = "clk_main", "clk_apb";
> + xlnx,bus-width = <128>;
> + xlnx,include-sg;
> + xlnx,overfetch;
> + dma-coherent;
> + xlnx,ratectrl = <0>;
> + xlnx,src-issue = <16>;
> + xlnx,desc-axi-cache = <0xFF>;
> + xlnx,src-axi-cache = <0xFF>;
> + xlnx,dst-axi-cache = <0xFF>;
Last I checked, AXI only has 4 cache bits.
> + xlnx,src-burst-len = <4>;
> + xlnx,dst-burst-len = <4>;
> +};
> --
> 2.1.2
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
