Thanks for your review and work. Best Regards, Yuan Yao > -----Original Message----- > From: Shawn Guo [mailto:shawnguo@xxxxxxxxxx] > Sent: Wednesday, April 13, 2016 10:30 AM > To: Yuan Yao <yao.yuan@xxxxxxxxxxxxx> > Cc: robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx; pawel.moll@xxxxxxx; Han > Xu <han.xu@xxxxxxx>; Yang-Leo Li <leoyang.li@xxxxxxx>; > devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; linux-arm- > kernel@xxxxxxxxxxxxxxxxxxx; Yao Yuan <yao.yuan@xxxxxxx> > Subject: Re: [PATCH v6 2/2] dts/ls2080a: update the DTS for QSPI and DSPI > support > > On Wed, Mar 09, 2016 at 06:22:06PM +0800, Yuan Yao wrote: > > Signed-off-by: Yuan Yao <yao.yuan@xxxxxxx> > > Acked-by: Han xu <han.xu@xxxxxxx> > > Changed subject prefix to 'arm64: dts: ls2080a: ', and then applied the patch. > > Shawn > > > --- > > Changed in v6: > > No changes. > > > > Changed in v5: > > Resend base on arm-soc. > > > > Changed in v4: > > No changes. > > > > Changed in v3: > > No changes. > > > > Changed in v2: > > Update my email to <yao.yuan@xxxxxxx> > > --- > > arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts | 9 ++++++++- > > arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 4 ++-- > > 2 files changed, 10 insertions(+), 3 deletions(-) > > > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts > > b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts > > index 4cb996d..e8801fa 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts > > @@ -178,7 +178,14 @@ > > > > &qspi { > > status = "okay"; > > - qflash0: s25fl008k { > > + flash0: s25fl256s1@0 { > > + #address-cells = <1>; > > + #size-cells = <1>; > > + compatible = "st,m25p80"; > > + spi-max-frequency = <20000000>; > > + reg = <0>; > > + }; > > + flash2: s25fl256s1@2 { > > #address-cells = <1>; > > #size-cells = <1>; > > compatible = "st,m25p80"; > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi > > b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi > > index 2b23d03..65e612a 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi > > @@ -318,7 +318,7 @@ > > > > dspi: dspi@2100000 { > > status = "disabled"; > > - compatible = "fsl,vf610-dspi"; > > + compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi"; > > #address-cells = <1>; > > #size-cells = <0>; > > reg = <0x0 0x2100000 0x0 0x10000>; @@ -444,7 +444,7 > @@ > > > > qspi: quadspi@20c0000 { > > status = "disabled"; > > - compatible = "fsl,vf610-qspi"; > > + compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi"; > > #address-cells = <1>; > > #size-cells = <0>; > > reg = <0x0 0x20c0000 0x0 0x10000>, > > -- > > 2.1.0.27.g96db324 > > > > > > _______________________________________________ > > linux-arm-kernel mailing list > > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
