From: Xinwei Kong <kong.kongxinwei@xxxxxxxxxxxxx>
Add all three dwmmc nodes description for hi6220
Signed-off-by: Guodong Xu <guodong.xu@xxxxxxxxxx>
Signed-off-by: Xinwei Kong <kong.kongxinwei@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 52 +++++++++++++++++++++++++++++++
1 file changed, 52 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index e8bb81f..7b7bbf6 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -720,5 +720,57 @@
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <3>;
};
+
+ dwmmc_0: dwmmc0@f723d000 {
+ compatible = "hisilicon,hi6220-dw-mshc";
+ num-slots = <0x1>;
+ cap-mmc-highspeed;
+ non-removable;
+ reg = <0x0 0xf723d000 0x0 0x1000>;
+ interrupts = <0x0 0x48 0x4>;
+ clocks = <&sys_ctrl 2>, <&sys_ctrl 1>;
+ clock-names = "ciu", "biu";
+ bus-width = <0x8>;
+ vmmc-supply = <&ldo19>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pmx_func &emmc_clk_cfg_func
+ &emmc_cfg_func &emmc_rst_cfg_func>;
+ };
+
+ dwmmc_1: dwmmc1@f723e000 {
+ compatible = "hisilicon,hi6220-dw-mshc";
+ num-slots = <0x1>;
+ card-detect-delay = <200>;
+ hisilicon,peripheral-syscon = <&ao_ctrl>;
+ cap-sd-highspeed;
+ reg = <0x0 0xf723e000 0x0 0x1000>;
+ interrupts = <0x0 0x49 0x4>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ clocks = <&sys_ctrl 4>, <&sys_ctrl 3>;
+ clock-names = "ciu", "biu";
+ vqmmc-supply = <&ldo7>;
+ vmmc-supply = <&ldo10>;
+ bus-width = <0x4>;
+ disable-wp;
+ cd-gpios = <&gpio1 0 1>;
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>;
+ pinctrl-1 = <&sd_pmx_idle &sd_clk_cfg_idle &sd_cfg_idle>;
+ };
+
+ dwmmc_2: dwmmc2@f723f000 {
+ compatible = "hisilicon,hi6220-dw-mshc";
+ num-slots = <0x1>;
+ reg = <0x0 0xf723f000 0x0 0x1000>;
+ interrupts = <0x0 0x4a 0x4>;
+ clocks = <&sys_ctrl HI6220_MMC2_CIUCLK>, <&sys_ctrl HI6220_MMC2_CLK>;
+ clock-names = "ciu", "biu";
+ bus-width = <0x4>;
+ broken-cd;
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&sdio_pmx_func &sdio_clk_cfg_func &sdio_cfg_func>;
+ pinctrl-1 = <&sdio_pmx_idle &sdio_clk_cfg_idle &sdio_cfg_idle>;
+ };
};
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
