On 04/11/2016 10:25 PM, Rob Herring wrote:
The PHY devices sometimes do have their reset signal (maybe even power
supply?) tied to some GPIO and sometimes it also does happen that a boot
loader does not leave it deasserted. So far this issue has been attacked
from (as I believe) a wrong angle: by teaching the MAC driver to manipulate
the GPIO in question; that solution, when applied to the device trees,
led to adding the PHY reset GPIO properties to the MAC device node, with
one exception: Cadence MACB driver which could handle the "reset-gpios"
prop in a PHY device subnode. I believe that the correct approach is to
teach the 'phylib' to get the MDIO device reset GPIO from the device tree
node corresponding to this device -- which this patch is doing...
Note that I had to modify the AT803x PHY driver as it would stop working
otherwise as it made use of the reset GPIO for its own purposes...
Lots of double spaces in here. Please fix.
Oh, it's you again! :-D
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/net/phy.txt | 2 +
drivers/net/phy/at803x.c | 19 ++------------
drivers/net/phy/mdio_bus.c | 4 +++
drivers/net/phy/mdio_device.c | 27 +++++++++++++++++++--
drivers/net/phy/phy_device.c | 33 ++++++++++++++++++++++++--
drivers/of/of_mdio.c | 16 ++++++++++++
include/linux/mdio.h | 3 ++
include/linux/phy.h | 5 +++
8 files changed, 89 insertions(+), 20 deletions(-)
[...]
Index: net-next/drivers/of/of_mdio.c
===================================================================
--- net-next.orig/drivers/of/of_mdio.c
+++ net-next/drivers/of/of_mdio.c
@@ -44,6 +44,7 @@ static int of_get_phy_id(struct device_n
static int of_mdiobus_register_phy(struct mii_bus *mdio, struct device_node *child,
u32 addr)
{
+ struct gpio_desc *gpiod;
struct phy_device *phy;
bool is_c45;
int rc;
@@ -52,10 +53,17 @@ static int of_mdiobus_register_phy(struc
is_c45 = of_device_is_compatible(child,
"ethernet-phy-ieee802.3-c45");
+ gpiod = fwnode_get_named_gpiod(&child->fwnode, "reset-gpios");
Calling fwnode_* functions in a DT specific file/function? That doesn't
make sense.
Really?! 8-)
Where is a DT-only analog I wonder...
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
