On Thu, Apr 07, 2016 at 07:57:48PM +0200, John Crispin wrote: > The current binding document only describes a single interrupt. Update the > document by adding the 2 other interrupts. > > The driver currently only uses a single interrupt. The HW is however able > to using IRQ grouping to split TX and RX onto separate GIC irqs. I assume you aren't breaking existing DTs, and the driver will continue to work with a single irq specified? > > Signed-off-by: John Crispin <blogic@xxxxxxxxxxx> > Cc: devicetree@xxxxxxxxxxxxxxx > --- > Documentation/devicetree/bindings/net/mediatek-net.txt | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt > index 5ca7929..2f142be 100644 > --- a/Documentation/devicetree/bindings/net/mediatek-net.txt > +++ b/Documentation/devicetree/bindings/net/mediatek-net.txt > @@ -9,7 +9,7 @@ have dual GMAC each represented by a child node.. > Required properties: > - compatible: Should be "mediatek,mt7623-eth" > - reg: Address and length of the register set for the device > -- interrupts: Should contain the frame engines interrupt > +- interrupts: Should contain the three frame engines interrupts Need to define what each irq is and the order. > - clocks: the clock used by the core > - clock-names: the names of the clock listed in the clocks property. These are > "ethif", "esw", "gp2", "gp1" > @@ -42,7 +42,9 @@ eth: ethernet@1b100000 { > <ðsys CLK_ETHSYS_GP2>, > <ðsys CLK_ETHSYS_GP1>; > clock-names = "ethif", "esw", "gp2", "gp1"; > - interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>; > + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW > + GIC_SPI 199 IRQ_TYPE_LEVEL_LOW > + GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>; > power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; > resets = <ðsys MT2701_ETHSYS_ETH_RST>; > reset-names = "eth"; > -- > 1.7.10.4 > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html