On Tue, Apr 05, 2016 at 11:51:02AM -0700, Tai Tri Nguyen wrote: > Hi Mark, > > On Mon, Apr 4, 2016 at 4:38 PM, Mark Rutland <mark.rutland@xxxxxxx> wrote: > > On Mon, Apr 04, 2016 at 04:40:33PM -0700, Tai Tri Nguyen wrote: > >> On Fri, Apr 1, 2016 at 5:30 AM, Mark Rutland <mark.rutland@xxxxxxx> wrote: > >> > On Thu, Mar 31, 2016 at 04:37:50PM -0700, Tai Nguyen wrote: > >> >> +This is APM X-Gene SoC PMU (Performance Monitoring Unit) module. > >> >> +The following PMU devices are supported: > >> >> + > >> >> + L3C - L3 cache controller > >> >> + IOB - IO bridge > >> >> + MCB - Memory controller bridge > >> >> + MC - Memory controller > >> > > >> > These sound like separate units. How do these relate? > >> > > >> > Is there an SOC-wide PMU that aggregates counters, or are these actually > >> > independent? > >> > > >> > >> Yes, they are independent, but sharing the same top level status interrupt. > >> There's no SOC-wide PMU which aggregates these counters. > > > > If they're just sharing the interrupt, why are they not separate nodes (and > > drivers) which simply happen to share an interrupt? > > > > Is there anything else shared? > > Yes, a long with the interrupt they also share top level PMU status CSR region. Ah, ok. I had missed that. What exactly exists in that region? Are the shared registers just for handling the shared interrupt, or are they used to handle other parts of the PMUs too? > >> >> +Required properties for L3C subnode: > >> >> +- compatible : Shall be "apm,xgene-pmu-l3c". > >> >> +- reg : First resource shall be the L3C PMU resource. > >> >> +- index : Instance number of the L3C PMU. > >> >> + > >> >> +Required properties for IOB subnode: > >> >> +- compatible : Shall be "apm,xgene-pmu-iob". > >> >> +- reg : First resource shall be the IOB PMU resource. > >> >> +- index : Instance number of the IOB PMU. > >> >> + > >> >> +Required properties for MCB subnode: > >> >> +- compatible : Shall be "apm,xgene-pmu-mcb". > >> >> +- reg : First resource shall be the MCB PMU resource. > >> >> +- index : Instance number of the MCB PMU. > >> >> + > >> >> +Required properties for MC subnode: > >> >> +- compatible : Shall be "apm,xgene-pmu-mc". > >> >> +- reg : First resource shall be the MC PMU resource. > >> >> +- index : Instance number of the MC PMU. > >> > > >> > What's the index property useful for? > >> > > >> > >> The index property is used for indicating the physical hardware PMU id. > >> For example, on X-Gene1 there are 4 memory controllers (MC), each of them has > >> its own PMU. The index property tells us which MC a PMU belongs to. > >> The same for MCB/L3C and IOB. > > > > Sure, but is this simply informative for the user, or does this have an impact > > on the programming model? > > > > Yes, it does impact. For example, there are 4 PMUs associated with 4 MCs. > They all certainly have the same sort of events. The index will help > to determine > the right event users want to monitor. Below is an example of perf list output: > ... > mc0/mcu-rd-request/ > ... > mc1/mcu-rd-request/ By "programming model" I mean the way the kernel interacts with the device, rather than the interface exposed to userspace. For example, does the index affect which bits are used in the shared CSR region? If it's only used for the name exposed to userspace, that's fine. Otherwise, there may be subtle gotchas. Thanks, Mark. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
