On Sat, Apr 02, 2016 at 05:29:33PM +0800, Guodong Xu wrote:
> From: Zhong Kaihua <zhongkaihua@xxxxxxxxxx>
>
> Add Hi6220 spi configuration nodes
>
> Signed-off-by: Zhong Kaihua <zhongkaihua@xxxxxxxxxx>
> Signed-off-by: Wei Xu <xuwei5@xxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 1 +
> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 15 +++++++++++++++
> arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi | 21 +++++++++++++++++++++
> 3 files changed, 37 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> index 985a2ad..5c9ee31 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> @@ -20,6 +20,7 @@
> serial1 = &uart1; /* BT UART */
> serial2 = &uart2; /* LS Expansion UART0 */
> serial3 = &uart3; /* LS Expansion UART1 */
> + spi0 = &spi_0;
You shouldn't really need an alias for SPI.
> };
>
> chosen {
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> index e96cc3c..dcca83b 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> @@ -585,5 +585,20 @@
> clock-names = "apb_pclk";
> status = "ok";
> };
> +
> + spi_0: spi@f7106000 {
> + compatible = "arm,pl022", "arm,primecell";
> + reg = <0x0 0xf7106000 0x0 0x1000>;
> + interrupts = <0 50 4>;
> + bus-id = <0>;
> + enable-dma = <0>;
> + clocks = <&sys_ctrl HI6220_SPI_CLK>;
> + clock-names = "apb_pclk";
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi0_pmx_func &spi0_cfg_func>;
> + num-cs = <1>;
> + cs-gpios = <&gpio6 2 0>;
> + status = "ok";
You only need an ok to override a disabled status, so I think you can
drop this. Or disable by default and let boards override it if that
makes sense.
Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
