- Remove unneeded leds0 alias.
- Switch to bcm6345-l1-intc interrupt controller.
- Use interrupt-controller instead of periph_intc.
- Add uart1 node.
Signed-off-by: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
---
arch/mips/boot/dts/brcm/bcm6368.dtsi | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)
diff --git a/arch/mips/boot/dts/brcm/bcm6368.dtsi b/arch/mips/boot/dts/brcm/bcm6368.dtsi
index 1f6b9b5..75aba97 100644
--- a/arch/mips/boot/dts/brcm/bcm6368.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6368.dtsi
@@ -32,8 +32,8 @@
};
aliases {
- leds0 = &leds0;
uart0 = &uart0;
+ uart1 = &uart1;
};
cpu_intc: cpu_intc {
@@ -64,16 +64,16 @@
mask = <0x1>;
};
- periph_intc: periph_intc@10000020 {
- compatible = "brcm,bcm3380-l2-intc";
- reg = <0x10000024 0x4 0x1000002c 0x4>,
- <0x10000020 0x4 0x10000028 0x4>;
+ periph_intc: interrupt-controller@10000020 {
+ compatible = "brcm,bcm6345-l1-intc";
+ reg = <0x10000020 0x10>,
+ <0x10000030 0x10>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&cpu_intc>;
- interrupts = <2>;
+ interrupts = <2>, <3>;
};
leds0: led-controller@100000d0 {
@@ -93,6 +93,15 @@
status = "disabled";
};
+ uart1: serial@10000120 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x10000120 0x18>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <3>;
+ clocks = <&periph_clk>;
+ status = "disabled";
+ };
+
ehci0: usb@10001500 {
compatible = "brcm,bcm6368-ehci", "generic-ehci";
reg = <0x10001500 0x100>;
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
