Re: Serial ports with non connected RTS/CTS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 01/27/2016 02:30 AM, Martin Fuzzey wrote:
> Hi all,
> 
> currently, at least for 8250 based serial ports using of_serial, there is no way of indicating that the RTS / CTS lines, although supported by the UART, are not actually connected on the board.
> 
> This means that userspace needs to know about this and not use the CRTSCTS termios flag (otherwise no data is sent).
> 
> This is currently the case for Debian stattach for example (nettools 1.60) which unconditionally uses CRTSCTS (but the busybox version of slattach has a "-F" option that can be used to disable CRTSCTS).
> 
> Would it not be better to allow this situation to be described in the device tree?
> 
> Such an option already exists for the imx UART (""fsl,uart-has-rtscts")
> 
> of_serial already has the "auto-flow-control" DT property but, as stated in the documentation:
>     "The  driver is allowed to detect support for the capability even without this  property."
> 
> In the past there was a (since reverted) property "has-hw-flow-control"
> See
>     06aa82e "serial: uart: add hw flow control support configuration"
>     a6eec92 " Revert "serial: uart: add hw flow control support configuration"
> 
> However that just provided another (redundant) way of *activating* hardware flow control and did not allow it to be disactivated.
> 
> Would a new DT property "no-rtscts" to do this be acceptable?
> 
> I think it would have to be a negative property to avoid breaking old device trees.
> 
> Since there seems to have been some to and fro on this issue I thought it would be a good idea to discuss before writing the patch...

If I understand you correctly here
1) you want a way to describe the lack of CTS and RTS pins, and
2) you want the 8250 driver to mask off CRTSCTS when #1 is true.

Sounds ok to me, but I'm not sure how userspace will respond to
CRTSCTS not sticking. That will need some testing.

Regards,
Peter Hurley

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux