Add binding documentation for NXP LPC1850 GPIO Pin Interrupt (PINT) controller. Signed-off-by: Joachim Eastwood <manabian@xxxxxxxxx> --- .../interrupt-controller/nxp,lpc1850-gpio-pint.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/nxp,lpc1850-gpio-pint.txt diff --git a/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc1850-gpio-pint.txt b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc1850-gpio-pint.txt new file mode 100644 index 0000000..0d59d31 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc1850-gpio-pint.txt @@ -0,0 +1,26 @@ +NXP LPC18xx/43xx GPIO Pin Interrupt (PINT) controller + +Required properties: + +- compatible : should be "nxp,lpc1850-gpio-pint". +- reg : Specifies base physical address and size of the registers. +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 2. +- interrupts : Must contain the interrupt numbers from the parent controller. + This defines the mapping between the controllers where the first + interrupt is mapped to pint hwirq 0 and so on. Which interrupts + that are connected to where and the number of is device specific. + For lpc1850 the mapping is 32 33 34 35 36 37 38 39 (8 in total). +- clocks: Must contain a reference to the functional clock. + +Example: + +pint: interrupt-controller@40087000 { + compatible = "nxp,lpc1850-gpio-pint"; + reg = <0x40087000 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <32 33 34 35 36 37 38 39>; + clocks = <&ccu1 CLK_CPU_GPIO>; +}; -- 2.8.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html