Add the device nodes for the i.MX7 FlexCAN buses.
Signed-off-by: Gary Bisson <gary.bisson@xxxxxxxxxxxxxxxxxxx>
---
Changes v1 -> v2:
- none
Changes v2 -> v3:
- Re-order flexcan nodes by unit-address order
- Remove flexcan unnecessary stop-mode property
---
arch/arm/boot/dts/imx7d.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 2547e16..6b3faa2 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -704,6 +704,26 @@
status = "disabled";
};
+ flexcan1: can@30a00000 {
+ compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+ reg = <0x30a00000 0x10000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CAN1_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ flexcan2: can@30a10000 {
+ compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+ reg = <0x30a10000 0x10000>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CAN2_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
i2c1: i2c@30a20000 {
#address-cells = <1>;
#size-cells = <0>;
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
