On Tue, Mar 15, 2016 at 03:04:21PM +0100, Gary Bisson wrote:
> Add the device nodes for the i.MX7 FlexCAN buses.
>
> Signed-off-by: Gary Bisson <gary.bisson@xxxxxxxxxxxxxxxxxxx>
> ---
>
> Changelog v1 -> v2:
> - none
>
> ---
> arch/arm/boot/dts/imx7d.dtsi | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
> index a768716..c5e47a4 100644
> --- a/arch/arm/boot/dts/imx7d.dtsi
> +++ b/arch/arm/boot/dts/imx7d.dtsi
> @@ -930,6 +930,28 @@
> fsl,num-rx-queues=<3>;
> status = "disabled";
> };
> +
> + flexcan1: can@30a00000 {
> + compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
> + reg = <0x30a00000 0x10000>;
> + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX7D_CLK_DUMMY>,
> + <&clks IMX7D_CAN1_ROOT_CLK>;
> + clock-names = "ipg", "per";
> + stop-mode = <&gpr 0x10 1 0x10 17>;
Is this property documented anywhere, or even supported by mainline
kernel?
Shawn
> + status = "disabled";
> + };
> +
> + flexcan2: can@30a10000 {
> + compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
> + reg = <0x30a10000 0x10000>;
> + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX7D_CLK_DUMMY>,
> + <&clks IMX7D_CAN2_ROOT_CLK>;
> + clock-names = "ipg", "per";
> + stop-mode = <&gpr 0x10 2 0x10 18>;
> + status = "disabled";
> + };
> };
> };
> };
> --
> 2.7.0
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
