Fix following DTC warnings in cros-adc-thermistors: Warning (unit_address_vs_reg): Node /adc@12D10000/ncp15wb473@3 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /adc@12D10000/ncp15wb473@4 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /adc@12D10000/ncp15wb473@5 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /adc@12D10000/ncp15wb473@6 has a unit name, but no reg property Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx> --- arch/arm/boot/dts/cros-adc-thermistors.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/cros-adc-thermistors.dtsi b/arch/arm/boot/dts/cros-adc-thermistors.dtsi index acd4fe1833f2..87e676917603 100644 --- a/arch/arm/boot/dts/cros-adc-thermistors.dtsi +++ b/arch/arm/boot/dts/cros-adc-thermistors.dtsi @@ -13,28 +13,28 @@ */ &adc { - ncp15wb473@3 { + ncp15wb473_3 { compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; pullup-ohm = <47000>; pulldown-ohm = <0>; io-channels = <&adc 3>; }; - ncp15wb473@4 { + ncp15wb473_4 { compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; pullup-ohm = <47000>; pulldown-ohm = <0>; io-channels = <&adc 4>; }; - ncp15wb473@5 { + ncp15wb473_5 { compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; pullup-ohm = <47000>; pulldown-ohm = <0>; io-channels = <&adc 5>; }; - ncp15wb473@6 { + ncp15wb473_6 { compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; pullup-ohm = <47000>; -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html