On Thu, Mar 31, 2016 at 06:31:39PM +0100, Srinivas Kandagatla wrote: > On some SOCs PORTS_IMPL register value is never programmed by the > firmware and left at zero value. Which means that no sata ports are > available for software. AHCI driver used to cope up with this by > fabricating the port_map if the PORTS_IMPL register is read zero, > but recent patch broke this workaround as zero value was valid for > NVMe disks. > > This patch adds ports-implemented DT bindings as workaround for this issue > in a way that DT can can override the PORTS_IMPL register in cases where > the firmware did not program it already. > > Fixes: 566d1827df2e ("libata: disable forced PORTS_IMPL for >= AHCI 1.3) > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> For 1 and 2, Acked-by: Tejun Heo <tj@xxxxxxxxxx> I can route all three through libata/for-4.6-fixes once the platform side is acked. If it's better to route these through the platform tree, please feel free to do so. Thanks. -- tejun -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html