From: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx> This patch add the UART2 clocks (mux, divider, gate) of Exynos3250 SoC. Cc: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx> Cc: Tomasz Figa <tomasz.figa@xxxxxxxxx> Signed-off-by: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx> Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx> --- drivers/clk/samsung/clk-exynos3250.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/clk/samsung/clk-exynos3250.c b/drivers/clk/samsung/clk-exynos3250.c index fdd41b17a24f..bc60e399d1bc 100644 --- a/drivers/clk/samsung/clk-exynos3250.c +++ b/drivers/clk/samsung/clk-exynos3250.c @@ -306,6 +306,7 @@ static struct samsung_mux_clock mux_clks[] __initdata = { MUX(CLK_MOUT_MMC0, "mout_mmc0", group_sclk_p, SRC_FSYS, 0, 4), /* SRC_PERIL0 */ + MUX(CLK_MOUT_UART2, "mout_uart2", group_sclk_p, SRC_PERIL0, 8, 4), MUX(CLK_MOUT_UART1, "mout_uart1", group_sclk_p, SRC_PERIL0, 4, 4), MUX(CLK_MOUT_UART0, "mout_uart0", group_sclk_p, SRC_PERIL0, 0, 4), @@ -390,6 +391,7 @@ static struct samsung_div_clock div_clks[] __initdata = { DIV(CLK_DIV_MMC0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4), /* DIV_PERIL0 */ + DIV(CLK_DIV_UART2, "div_uart2", "mout_uart2", DIV_PERIL0, 8, 4), DIV(CLK_DIV_UART1, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4), DIV(CLK_DIV_UART0, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4), @@ -552,6 +554,9 @@ static struct samsung_gate_clock gate_clks[] __initdata = { GATE_SCLK_PERIL, 7, CLK_SET_RATE_PARENT, 0), GATE(CLK_SCLK_SPI0, "sclk_spi0", "div_spi0_pre", GATE_SCLK_PERIL, 6, CLK_SET_RATE_PARENT, 0), + + GATE(CLK_SCLK_UART2, "sclk_uart2", "div_uart2", + GATE_SCLK_PERIL, 2, CLK_SET_RATE_PARENT, 0), GATE(CLK_SCLK_UART1, "sclk_uart1", "div_uart1", GATE_SCLK_PERIL, 1, CLK_SET_RATE_PARENT, 0), GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0", @@ -649,6 +654,7 @@ static struct samsung_gate_clock gate_clks[] __initdata = { GATE(CLK_I2C2, "i2c2", "div_aclk_100", GATE_IP_PERIL, 8, 0, 0), GATE(CLK_I2C1, "i2c1", "div_aclk_100", GATE_IP_PERIL, 7, 0, 0), GATE(CLK_I2C0, "i2c0", "div_aclk_100", GATE_IP_PERIL, 6, 0, 0), + GATE(CLK_UART2, "uart2", "div_aclk_100", GATE_IP_PERIL, 2, 0, 0), GATE(CLK_UART1, "uart1", "div_aclk_100", GATE_IP_PERIL, 1, 0, 0), GATE(CLK_UART0, "uart0", "div_aclk_100", GATE_IP_PERIL, 0, 0, 0), }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html