On Wed 23 Mar 12:47 PDT 2016, Srinivas Kandagatla wrote: > This patch adds pcie and regulators required to get on board ATL1C > ethernet working. > --- Acked-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> Regards, Bjorn > .../arm/boot/dts/qcom-apq8064-dragonboard-600c.dts | 36 ++++++++++++++++++++++ > 1 file changed, 36 insertions(+) > > diff --git a/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts b/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts > index 5374510..d3e6193 100644 > --- a/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts > +++ b/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts > @@ -20,6 +20,16 @@ > regulator-type = "voltage"; > regulator-boot-on; > }; > + > + /* on board fixed 3.3v supply */ > + vcc3v3: vcc3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "VCC3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > }; > > soc { > @@ -31,6 +41,18 @@ > bias-disable; > }; > }; > + > + pcie_pins: pcie_pinmux { > + mux { > + pins = "gpio27"; > + function = "gpio"; > + }; > + conf { > + pins = "gpio27"; > + drive-strength = <12>; > + bias-disable; > + }; > + }; > }; > > rpm@108000 { > @@ -109,6 +131,10 @@ > regulator-max-microvolt = <1900000>; > bias-pull-down; > }; > + > + lvs6 { > + bias-pull-down; > + }; > }; > }; > > @@ -135,6 +161,16 @@ > }; > }; > > + pci@1b500000 { > + status = "okay"; > + vdda-supply = <&pm8921_s3>; > + vdda_phy-supply = <&pm8921_lvs6>; > + vdda_refclk-supply = <&vcc3v3>; > + pinctrl-0 = <&pcie_pins>; > + pinctrl-names = "default"; > + perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; > + }; > + > /* OTG */ > phy@12500000 { > status = "okay"; > -- > 2.5.0 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html