Instead of duplicating the node hierarchy, reference the nodes by label,
adding labels where necessary.
Drop some trailing or inconsistent white lines while at it.
Fixes: ec7e5a569bce ("arm64: dts: marvell: add Device Tree files for Armada 7K/8K")
Cc: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Andreas Färber <afaerber@xxxxxxx>
---
Is it intentional that there are no aliases for the two serial nodes and no /chosen/stdout-path?
arch/arm64/boot/dts/marvell/armada-7040-db.dts | 52 ++++++++++------------
arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi | 1 -
arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi | 2 -
arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 7 +--
4 files changed, 26 insertions(+), 36 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index 064a251346dd..ee5778395bea 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -55,38 +55,34 @@
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
+};
- ap806 {
- config-space {
- spi@510600 {
- status = "okay";
-
- spi-flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "n25q128a13";
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <10000000>;
+&i2c0 {
+ status = "okay";
+ clock-frequency = <100000>;
+};
- partition@0 {
- label = "U-Boot";
- reg = <0 0x200000>;
- };
- partition@400000 {
- label = "Filesystem";
- reg = <0x200000 0xce0000>;
- };
- };
- };
+&spi0 {
+ status = "okay";
- i2c@511000 {
- status = "okay";
- clock-frequency = <100000>;
- };
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q128a13";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <10000000>;
- serial@512000 {
- status = "okay";
- };
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x200000>;
+ };
+ partition@400000 {
+ label = "Filesystem";
+ reg = <0x200000 0xce0000>;
};
};
};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
index f25c5c17fad7..95a1ff60f6c1 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
@@ -68,4 +68,3 @@
};
};
};
-
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
index baa7d9a516b3..ba43a4357b89 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
@@ -79,6 +79,4 @@
enable-method = "psci";
};
};
-
};
-
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 556a92bcc2f6..3ecf9b1798fa 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -59,7 +59,6 @@
method = "smc";
};
-
ap806 {
#address-cells = <2>;
#size-cells = <2>;
@@ -190,7 +189,7 @@
status = "disabled";
};
- serial@512000 {
+ uart0: serial@512000 {
compatible = "snps,dw-apb-uart";
reg = <0x512000 0x100>;
reg-shift = <2>;
@@ -200,7 +199,7 @@
status = "disabled";
};
- serial@512100 {
+ uart1: serial@512100 {
compatible = "snps,dw-apb-uart";
reg = <0x512100 0x100>;
reg-shift = <2>;
@@ -232,6 +231,4 @@
};
};
};
-
};
-
--
2.6.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
