Instead of duplicating the SoC's node hierarchy, including a bus node
named "internal-regs", reference the actually desired nodes by label,
like Berlin already does. Add labels where necessary.
Drop an inconsistent white line while at it.
Fixes: adbc3695d9e4 ("arm64: dts: add the Marvell Armada 3700 family and a development board")
Cc: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Andreas Färber <afaerber@xxxxxxx>
---
arch/arm64/boot/dts/marvell/armada-3720-db.dts | 35 +++++++++++---------------
arch/arm64/boot/dts/marvell/armada-372x.dtsi | 1 -
arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 4 +--
3 files changed, 17 insertions(+), 23 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index 359050154511..48f97d14b057 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -60,27 +60,22 @@
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
};
+};
- soc {
- internal-regs {
- /*
- * Exported on the micro USB connector CON32
- * through an FTDI
- */
- uart0: serial@12000 {
- status = "okay";
- };
-
- /* CON31 */
- usb3@58000 {
- status = "okay";
- };
+/* CON3 */
+&sata {
+ status = "okay";
+};
- /* CON3 */
- sata@e0000 {
- status = "okay";
- };
- };
- };
+/*
+ * Exported on the micro USB connector CON32
+ * through an FTDI
+ */
+&uart0 {
+ status = "okay";
};
+/* CON31 */
+&usb3 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-372x.dtsi b/arch/arm64/boot/dts/marvell/armada-372x.dtsi
index f292a00ce97c..5120296596c2 100644
--- a/arch/arm64/boot/dts/marvell/armada-372x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi
@@ -59,5 +59,4 @@
enable-method = "psci";
};
};
-
};
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index ba9df7ff2a72..4328c2408a8a 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -105,14 +105,14 @@
status = "disabled";
};
- usb3@58000 {
+ usb3: usb3@58000 {
compatible = "generic-xhci";
reg = <0x58000 0x4000>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- sata@e0000 {
+ sata: sata@e0000 {
compatible = "marvell,armada-3700-ahci";
reg = <0xe0000 0x2000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
--
2.6.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
