Re: [PATCH v2 0/3] ARM: OMAP3: Fix McBSP2/3 hwmod setup for sidetone

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, 18 Mar 2016, Peter Ujfalusi wrote:

> Hi,
> 
> Chanes since v1:
> - removed the ASoC patch as Mark has applied it already
> - Added my signed-off to the hwmod patch
> - New patch to handle the case when the sidetone hwmod has been removed for
>   legacy boot.
> 
> The series addresses a long standing issue with McBSP2/3 regarding to hwmod
> setup. When booting with DT a warning is printed that mcbsp2/3 is using two
> hwmod.
> The root of the issue is the way how the hwmod data was constructed in the first
> place for OMAP3 McBSP2/3.
> After re-reading the TRM it is clear that the sidetone should not have it's
> own hwmod data as it is not a separate IP, it is part of the McBSP module. It
> can not affect PRCM either since it's SYSCONFIG register's AUTOIDLE bit is only
> sets the autoidle from the internal McBSP_iclk clock to the sidetone block of
> the same McBSP.

NAK, at least without further discussion - see my comments on the v1 0/3 
introduction.

- Paul
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux