This is a basic TFT panel with a 40-pin FPC connector on it. The
specification doesn't define timings, but the Adafruit instructions
were setting up 800x480 CVT.
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
---
.../bindings/display/panel/ontat,yx700wv03.txt | 7 +++++
drivers/gpu/drm/panel/panel-simple.c | 33 ++++++++++++++++++++++
2 files changed, 40 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt
diff --git a/Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt b/Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt
new file mode 100644
index 0000000..3d8a5e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt
@@ -0,0 +1,7 @@
+On Tat Industrial Company 7" DPI TFT panel.
+
+Required properties:
+- compatible: should be "ontat,yx700wv03"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index f88a631..6583fdd 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1176,6 +1176,36 @@ static const struct panel_desc shelly_sca07010_bfn_lnn = {
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
};
+/* 800x480 CVT. The panel appears to be quite accepting, at least as
+ * far as pixel clocks, but this is the timing that was being used in
+ * the Adafruit installation instructions.
+ */
+static const struct drm_display_mode ontat_yx700wv03_mode = {
+ .clock = 29500,
+ .hdisplay = 800,
+ .hsync_start = 824,
+ .hsync_end = 896,
+ .htotal = 992,
+ .vdisplay = 480,
+ .vsync_start = 483,
+ .vsync_end = 493,
+ .vtotal = 500,
+ .vrefresh = 60,
+};
+
+/* Specification at
+ * https://www.adafruit.com/images/product-files/2406/c3163.pdf
+ */
+static const struct panel_desc ontat_yx700wv03 = {
+ .modes = &ontat_yx700wv03_mode,
+ .num_modes = 1,
+ .bpc = 8,
+ .size = {
+ .width = 154,
+ .height = 83,
+ },
+};
+
static const struct of_device_id platform_of_match[] = {
{
.compatible = "ampire,am800480r3tmqwa1h",
@@ -1265,6 +1295,9 @@ static const struct of_device_id platform_of_match[] = {
.compatible = "okaya,rs800480t-7x0gp",
.data = &okaya_rs800480t_7x0gp,
}, {
+ .compatible = "ontat,yx700wv03",
+ .data = &ontat_yx700wv03,
+ }, {
.compatible = "ortustech,com43h4m85ulc",
.data = &ortustech_com43h4m85ulc,
}, {
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
