In preparation for working on DSI panel support, I wrote the much simpler support for DPI panels. I've tested it on the 7" DPI panel from Adafruit, with panel-simple support included here. Eric Anholt (5): of: Add vendor prefix for On Tat Industrial Company. panel-simple: Add the 7" DPI panel from Adafruit. drm: Add an encoder and connector type enum for DPI. drm/vc4: Add DPI driver ARM: bcm2835: Add the DPI hardware to the device tree. .../devicetree/bindings/display/brcm,bcm-vc4.txt | 67 +++ .../bindings/display/panel/ontat,yx700wv03.txt | 7 + .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/bcm283x.dtsi | 11 + drivers/gpu/drm/drm_crtc.c | 2 + drivers/gpu/drm/panel/panel-simple.c | 33 ++ drivers/gpu/drm/vc4/Kconfig | 1 + drivers/gpu/drm/vc4/Makefile | 1 + drivers/gpu/drm/vc4/vc4_debugfs.c | 1 + drivers/gpu/drm/vc4/vc4_dpi.c | 518 +++++++++++++++++++++ drivers/gpu/drm/vc4/vc4_drv.c | 1 + drivers/gpu/drm/vc4/vc4_drv.h | 5 + include/uapi/drm/drm_mode.h | 2 + 13 files changed, 650 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt create mode 100644 drivers/gpu/drm/vc4/vc4_dpi.c -- 2.7.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
