On 14.03.2016 10:12, Chanwoo Choi wrote: > This patch adds initial pin configuration using pinctrl subsystem > to reduce leakage power-consumption of gpio pins in normal state. > All pins included in this patch are NC (not connected) pin. > > Cc: Kukjin Kim <kgene.kim@xxxxxxxxxxx> > Cc: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx> > Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx> > --- > arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 38 +++++++++++++++++ > arch/arm/boot/dts/exynos3250-rinato.dts | 70 ++++++++++++++++++++++++++++++- > 2 files changed, 106 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi > index 5ab81c39e2c9..ecf79386e891 100644 > --- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi > +++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi > @@ -16,11 +16,49 @@ > #define PIN_PULL_DOWN 1 > #define PIN_PULL_UP 3 > > +#define PIN_DRV_LV1 0 > +#define PIN_DRV_LV2 2 > +#define PIN_DRV_LV3 1 > +#define PIN_DRV_LV4 3 > + > #define PIN_PDN_OUT0 0 > #define PIN_PDN_OUT1 1 > #define PIN_PDN_INPUT 2 > #define PIN_PDN_PREV 3 > > +#define PIN_IN(_pin, _pull, _drv) \ > + _pin { \ > + samsung,pins = #_pin; \ > + samsung,pin-function = <0>; \ > + samsung,pin-pud = <PIN_PULL_ ##_pull>; \ > + samsung,pin-drv = <PIN_DRV_ ##_drv>; \ > + } > + > +#define PIN_OUT(_pin, _drv) \ > + _pin { \ > + samsung,pins = #_pin; \ > + samsung,pin-function = <1>; \ > + samsung,pin-pud = <0>; \ > + samsung,pin-drv = <PIN_DRV_ ##_drv>; \ > + } > + > +#define PIN_OUT_SET(_pin, _val, _drv) \ > + _pin { \ > + samsung,pins = #_pin; \ > + samsung,pin-function = <1>; \ > + samsung,pin-pud = <0>; \ > + samsung,pin-drv = <PIN_DRV_ ##_drv>; \ > + samsung,pin-val = <_val>; \ > + } > + > +#define PIN_CFG(_pin, _sel, _pull, _drv) \ > + _pin { \ > + samsung,pins = #_pin; \ > + samsung,pin-function = <_sel>; \ > + samsung,pin-pud = <PIN_PULL_ ##_pull>; \ > + samsung,pin-drv = <PIN_DRV_ ##_drv>; \ > + } > + > #define PIN_SLP(_pin, _mode, _pull) \ > _pin { \ > samsung,pins = #_pin; \ > diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts > index 3e64d5dcdd60..1c78a2153776 100644 > --- a/arch/arm/boot/dts/exynos3250-rinato.dts > +++ b/arch/arm/boot/dts/exynos3250-rinato.dts > @@ -681,7 +681,21 @@ > > &pinctrl_0 { > pinctrl-names = "default"; > - pinctrl-0 = <&sleep0>; > + pinctrl-0 = <&initial0 &sleep0>; > + > + initial0: initial-state { > + PIN_IN(gpa1-4, DOWN, LV1); > + PIN_IN(gpa1-5, DOWN, LV1); > + > + PIN_IN(gpc0-0, DOWN, LV1); > + PIN_IN(gpc0-1, DOWN, LV1); > + PIN_IN(gpc0-2, DOWN, LV1); > + PIN_IN(gpc0-3, DOWN, LV1); > + PIN_IN(gpc0-4, DOWN, LV1); > + > + PIN_IN(gpd0-0, DOWN, LV1); > + PIN_IN(gpd0-1, DOWN, LV1); > + }; > > sleep0: sleep-state { > PIN_SLP(gpa0-0, INPUT, DOWN); > @@ -735,7 +749,59 @@ > > &pinctrl_1 { > pinctrl-names = "default"; > - pinctrl-0 = <&sleep1>; > + pinctrl-0 = <&initial1 &sleep1>; > + > + initial1: initial-state { > + PIN_IN(gpe0-6, DOWN, LV1); > + PIN_IN(gpe0-7, DOWN, LV1); > + > + PIN_IN(gpe1-0, DOWN, LV1); > + PIN_IN(gpe1-3, DOWN, LV1); > + PIN_IN(gpe1-4, DOWN, LV1); > + PIN_IN(gpe1-5, DOWN, LV1); > + PIN_IN(gpe1-6, DOWN, LV1); > + > + PIN_IN(gpk2-0, DOWN, LV1); > + PIN_IN(gpk2-1, DOWN, LV1); > + PIN_IN(gpk2-2, DOWN, LV1); > + PIN_IN(gpk2-3, DOWN, LV1); > + PIN_IN(gpk2-4, DOWN, LV1); > + PIN_IN(gpk2-5, DOWN, LV1); > + PIN_IN(gpk2-6, DOWN, LV1); > + > + PIN_IN(gpm0-0, DOWN, LV1); > + PIN_IN(gpm0-1, DOWN, LV1); > + PIN_IN(gpm0-2, DOWN, LV1); > + PIN_IN(gpm0-3, DOWN, LV1); > + PIN_IN(gpm0-4, DOWN, LV1); > + PIN_IN(gpm0-5, DOWN, LV1); > + PIN_IN(gpm0-6, DOWN, LV1); > + PIN_IN(gpm0-7, DOWN, LV1); > + > + PIN_IN(gpm1-0, DOWN, LV1); > + PIN_IN(gpm1-1, DOWN, LV1); > + PIN_IN(gpm1-2, DOWN, LV1); > + PIN_IN(gpm1-3, DOWN, LV1); > + PIN_IN(gpm1-4, DOWN, LV1); > + PIN_IN(gpm1-5, DOWN, LV1); > + PIN_IN(gpm1-6, DOWN, LV1); A blank line here. Beside that: Reviewed-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx> Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html