There is currently two other patch series[1][2] that depend on the three first (ALSA-) patches of this series. It would be nice to get at least those three applied sooner rather than later, so please tell me if I can do anything to get those in. BTW, I applied the relevant patches from the two series to on top of this one. Obviously the two series conflicted with each other a bit and also the IEC958 helper patch from [2] conflicted with the IEC958 patch from my series (which is weird since Arnaud's series depends on my series...). After resolving the conflicts everything compiled fine, but for some reason neither the 'ELD' or IEC958 Playback Default' appeared on my BBB. I'll try to find time to debug this further at some point. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2016-March/105509.html [2] http://mailman.alsa-project.org/pipermail/alsa-devel/2016-March/105502.html Changes since v5 - Rebased on top of the latest drm-next branch - Allow 32 bit samplewidth in snd_pcm_create_iec958_consumer() and snd_pcm_create_iec958_consumer_hw_params() - Propose new simpler DT binding for tda998x audio - Squash tda998x audio DT binding together with hdmi-codec integration Changes since RFC v4, - Rebased on top of the latest drm-next branch - Split the hdmi-codec abort functionality into a separate patch for better visibility of what it is all about - This does not affect the tda998x patches as the abort functionality is not used - Drop S18_3* formats from I2S_FORMATS and add a comment about formats not supported by HDMI Changes since RFC v3, ASoC side: - Add "ALSA: pcm: add IEC958 channel status helper for hw_params" - Add "tda998x: Improve tda998x_configure_audio() audio related pdata" - use snd_pcm_create_iec958_consumer_hw_params() to construct the stream header - Remove set_clk() callback from hdmi-codec. It is not needed for now. - Refer to stream header in AIF as specified in HDMI standard - Set current_stream to NULL only after video side audio_shutdown() has been called. Avoid potential race if video side attempts to abort audio at the same time. - No need to have video side device pointer in the hdmi codec's pdata as it is found from dev->parent. - Fix hdmi-codec enum: DAI_ID_I2C > DAI_ID_I2S - Improve audio_startup API comment - Make improved checkpatch happy - BUG_ON > WARN_ON - put */ ending the block comment to a separate line DRM side: - Fix tda998x get_eld() locking - Change tda998x audio parameters in pdata to more generic, that can be readily used in tda998x_audio_config() - Rename and restructure audio port related private data members to be more descriptive - Require audio configuration trough ASoC hdmi-codec if HDMI audio is configured trough DT binding. DTS: - Increase McASP fifo usage form 1 to 32 Jyri Sarha (6): ALSA: pcm: add IEC958 channel status helper for hw_params ASoC: hdmi-codec: Add hdmi-codec for external HDMI-encoders ASoC: hdmi-codec: Add audio abort() callback for video side to use drm/i2c: tda998x: Improve tda998x_configure_audio() audio related pdata drm/i2c: tda998x: Register ASoC hdmi-codec and add audio DT binding ARM: dts: am335x-boneblack: Add HDMI audio support .../devicetree/bindings/display/bridge/tda998x.txt | 18 + arch/arm/boot/dts/am335x-boneblack.dts | 71 +++- drivers/gpu/drm/i2c/Kconfig | 1 + drivers/gpu/drm/i2c/tda998x_drv.c | 271 ++++++++++++-- include/drm/i2c/tda998x.h | 24 +- include/dt-bindings/display/tda998x.h | 7 + include/sound/hdmi-codec.h | 104 ++++++ include/sound/pcm_iec958.h | 2 + sound/core/pcm_iec958.c | 53 ++- sound/soc/codecs/Kconfig | 6 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/hdmi-codec.c | 411 +++++++++++++++++++++ 12 files changed, 898 insertions(+), 72 deletions(-) create mode 100644 include/dt-bindings/display/tda998x.h create mode 100644 include/sound/hdmi-codec.h create mode 100644 sound/soc/codecs/hdmi-codec.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html