Hi Goudong, On 03/06/2016 05:47 PM, Guodong Xu wrote: > Add resets property to synopsys-dw-mshc bindings. It is intended to > represent the hardware reset signal present internally in some host > controller IC designs. > > See Documentation/devicetree/bindings/reset/reset.txt for details. > > Signed-off-by: Guodong Xu <guodong.xu@xxxxxxxxxx> > Acked-by: Rob Herring <robh@xxxxxxxxxx> > --- > Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt > index 8636f5a..4e00e85 100644 > --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt > +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt > @@ -39,6 +39,10 @@ Required Properties: > > Optional properties: > > +* resets: phandle + reset specifier pair, intended to represent hardware > + reset signal present internally in some host controller IC designs. > + See Documentation/devicetree/bindings/reset/reset.txt for details. Is this reset property for common dwmmc IP controller? Best Regards, Jaehoon Chung > + > * clocks: from common clock binding: handle to biu and ciu clocks for the > bus interface unit clock and the card interface unit clock. > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
