On Tue, Mar 01, 2016 at 11:04:36PM +0100, Carlo Caione wrote: > From: Carlo Caione <carlo@xxxxxxxxxxxx> > > Fix pin controller documentation with the new compatibles. What was wrong with it? (answer in the commit msg) > > Signed-off-by: Carlo Caione <carlo@xxxxxxxxxxxx> > --- > .../devicetree/bindings/pinctrl/meson,pinctrl.txt | 36 +++------------------- > 1 file changed, 5 insertions(+), 31 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt > index 3f6a524..51a8ebb 100644 > --- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt > +++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt > @@ -1,13 +1,14 @@ > == Amlogic Meson pinmux controller == > > Required properties for the root node: > - - compatible: "amlogic,meson8-pinctrl" or "amlogic,meson8b-pinctrl" > + - compatible: "amlogic,meson8-cbus-pinctrl", "amlogic,meson8b-cbus-pinctrl", > + "amlogic,meson8-aobus-pinctrl" or "amlogic,meson8b-aobus-pinctrl" Reformat with 1 per line (assuming each are mutually exclusive). > - reg: address and size of registers controlling irq functionality > > === GPIO sub-nodes === > > -The 2 power domains of the controller (regular and always-on) are > -represented as sub-nodes and each of them acts as a GPIO controller. > +Each power domain of the controller (regular and always-on) is > +represented as a sub-node and it acts as a GPIO controller. > > Required properties for sub-nodes are: > - reg: should contain address and size for mux, pull-enable, pull and > @@ -18,10 +19,6 @@ Required properties for sub-nodes are: > - gpio-controller: identifies the node as a gpio controller > - #gpio-cells: must be 2 > > -Valid sub-node names are: > - - "banks" for the regular domain > - - "ao-bank" for the always-on domain > - Why are these being removed? > === Other sub-nodes === > > Child nodes without the "gpio-controller" represent some desired > @@ -45,7 +42,7 @@ pinctrl-bindings.txt > === Example === > > pinctrl: pinctrl@c1109880 { > - compatible = "amlogic,meson8-pinctrl"; > + compatible = "amlogic,meson8-cbus-pinctrl"; > reg = <0xc1109880 0x10>; > #address-cells = <1>; > #size-cells = <1>; > @@ -61,15 +58,6 @@ pinctrl-bindings.txt > #gpio-cells = <2>; > }; > > - gpio_ao: ao-bank@c1108030 { > - reg = <0xc8100014 0x4>, > - <0xc810002c 0x4>, > - <0xc8100024 0x8>; > - reg-names = "mux", "pull", "gpio"; > - gpio-controller; > - #gpio-cells = <2>; > - }; > - > nand { > mux { > groups = "nand_io", "nand_io_ce0", "nand_io_ce1", > @@ -79,18 +67,4 @@ pinctrl-bindings.txt > function = "nand"; > }; > }; > - > - uart_ao_a { > - mux { > - groups = "uart_tx_ao_a", "uart_rx_ao_a", > - "uart_cts_ao_a", "uart_rts_ao_a"; > - function = "uart_ao"; > - }; > - > - conf { > - pins = "GPIOAO_0", "GPIOAO_1", > - "GPIOAO_2", "GPIOAO_3"; > - bias-disable; > - }; > - }; > }; > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html