On Tue, Mar 01, 2016 at 03:09:39PM +0800, Zhao Qiang wrote:
> Add uqe_serial document to
> Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.txt
>
> Signed-off-by: Zhao Qiang <qiang.zhao@xxxxxxx>
> ---
> Changes for v2
> - modify tx/rx-clock-name specification
> Changes for v2
> - NA
>
> .../bindings/powerpc/fsl/cpm_qe/uqe_serial.txt | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.txt
>
> diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.txt
> new file mode 100644
> index 0000000..436c71c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.txt
> @@ -0,0 +1,19 @@
> +* Serial
> +
> +Currently defined compatibles:
> +- ucc_uart
I guess this is in use already and okay. However, looking at the driver
there really should be SoC specific compatible strings here since the
driver is looking up the SoC compatible string and composing the
firmware filename from that.
> +
> +Properties for ucc_uart:
> +port-number : port number of UCC-UART
> +tx/rx-clock-name : should be "brg1"-"brg16" for internal clock source,
> + should be "clk1"-"clk28" for external clock source.
> +
> +Example:
> +
> + ucc_serial: ucc@2200 {
> + device_type = "serial";
Drop device_type. It should only be used in a few legacy cases.
Looks like the driver is matching on this. Please drop it from the
driver too. I'd leave dts files for now, but they should be updated too
later.
> + compatible = "ucc_uart";
> + port-number = <1>;
> + rx-clock-name = "brg2";
> + tx-clock-name = "brg2";
> + };
> --
> 2.1.0.27.g96db324
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
