Re: [PATCH 2/3] usb: chipidea: host: let the hcd know's parent device node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Thu, Mar 03, 2016 at 03:42:47PM +0100, Andrew Lunn wrote:
> On Thu, Mar 03, 2016 at 06:01:15PM +0800, Peter Chen wrote:
> > From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
> > 
> > Since the hcd (chipidea core device) has no device node, so
> > if we want to describe the child node under the hcd, we had
> > to put it under its parent's node (glue layer device), and
> > in the code, we need to let the hcd knows glue layer's code,
> > then the USB core can handle this node.
> > 
> > Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
> > ---
> >  drivers/usb/chipidea/host.c | 18 ++++++++++++++----
> >  1 file changed, 14 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
> > index 053bac9..55120ef 100644
> > --- a/drivers/usb/chipidea/host.c
> > +++ b/drivers/usb/chipidea/host.c
> > @@ -109,15 +109,25 @@ static int host_start(struct ci_hdrc *ci)
> >  	struct ehci_hcd *ehci;
> >  	struct ehci_ci_priv *priv;
> >  	int ret;
> > +	struct device *dev = ci->dev;
> >  
> > -	if (usb_disabled())
> > +	if (usb_disabled() || !dev)
> >  		return -ENODEV;
> >  
> > -	hcd = usb_create_hcd(&ci_ehci_hc_driver, ci->dev, dev_name(ci->dev));
> > +	/*
> > +	 * USB Core will try to get child node under roothub,
> > +	 * but chipidea core has no of_node, and the child node
> > +	 * for controller is located at glue layer's node which
> > +	 * is chipidea core's parent.
> > +	 */
> > +	if (dev->parent && dev->parent->of_node)
> > +		dev->of_node = dev->parent->of_node;
> 
> Is this a good idea? Two devices with the same of_node?
> 

This is only for chipidea driver whose host controller device
doesn't have entry at dts, but other host controller driver which
supports device tree should have its entry at dts.

> I know the networking code assumes of_node values are unique, and uses
> it to find a device. Are you 100% sure the USB code does not make this
> assumption.
> 

The controller device is the root for USB device, the common
USB code will not touch its glue layer device (controller's parent).

-- 

Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux