On 2 March 2016 at 19:13, Rob Herring <robh@xxxxxxxxxx> wrote: > On Thu, Feb 25, 2016 at 11:04:47PM +0100, Joachim Eastwood wrote: >> Add binding documentation for NXP LPC1850 GPIO Pin Interrupt (PINT) >> controller. >> >> Signed-off-by: Joachim Eastwood <manabian@xxxxxxxxx> >> --- >> .../interrupt-controller/nxp,lpc1850-gpio-pint.txt | 22 ++++++++++++++++++++++ >> 1 file changed, 22 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/nxp,lpc1850-gpio-pint.txt >> >> diff --git a/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc1850-gpio-pint.txt b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc1850-gpio-pint.txt >> new file mode 100644 >> index 000000000000..dc43f187ebda >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc1850-gpio-pint.txt >> @@ -0,0 +1,22 @@ >> +NXP LPC18xx/43xx GPIO Pin Interrupt (PINT) controller >> + >> +Required properties: >> + >> +- compatible : should be "nxp,lpc1850-gpio-pint". >> +- reg : Specifies base physical address and size of the registers. >> +- interrupt-controller : Identifies the node as an interrupt controller >> +- #interrupt-cells : Specifies the number of cells needed to encode an >> + interrupt source. The value shall be 2. >> +- interrupts : Specifies the CPU interrupts the controller is connected to. > > How many (8?) and what's the ordering? The PINT on has 8 interrupts, but this is device dependent. Up to 32 could be supported. The order is also device dependent. The interrupts on PINT are merely mapped onto the main interrupt controller. I tried to keep the wording in the binding generic so it could support the PINT on different devices. I'll update the text with some more details. regards, Joachim Eastwood -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
